Printable View
I need a mauser bolt for the 270 project. One of the sources I have checked has these to offer. One good basic style bolt. The other is a butter knife shape
Thoughts on each? Cost the same so irrelevant. Only a basic mauser parker hale so nothing flash really needed
Attachment 138609
Attachment 138610
Greetings Csmiffy,
If you are going to fit a scope I would go for the one with the knob. The spoon job will need to be replaced to fit a low scope.
Regards Grandpamac.
Are you able to try them in your action including a locking lug contact check?
The one with the round knob is what I would go for. Will need to notch receiver so bolt closes, need to check lug contact and headspace before using.
@grandpamac that's a bit of a bugger. The supplier was instructed that it will be on a scoped rifle and its intended purpose. He picked the most suitable @zimmer nope-not local. But this will be going to the gunsmith for the barrel change/headspace. If it needs a little lapping then so be it. It would be nice to get some truing etc done but that just isn't in the budget.
I doubt there is someone in CHCH with half a dozen bolts but it could be worth the ask.
It would've been heaps easier if one of them had a better safety already modified for scope use.
@garyp it is a parker hale safari model. Wouldn't the receiver already be done?
I do get it though-definitely get it done. All part of the bolt fitting part. I can do minor stuff but not barrel swaps/head spacing or bolt bending lol. Minor non drastic fitting is well within my grasp.
Will throw in a low scope safety free aswell.
@garyp pmd you
Cant argue with that , top manQuote:
Originally Posted by garyp
