Thread: The model 7 in your life

@GWH @gimp

Could you help me out and let me know what COAL's you are getting with your M7 .223's please?

Looking at one here but unsure what the standard floorplate will give since it is blocked at the back vs. a standard m7.

Considering an MDT chasis to run AICS mags but not seen many (if any!) of these even on the interweb.

Cheers!

Originally Posted by caberslash

@GWH @gimp

Could you help me out and let me know what COAL's you are getting with your M7 .223's please?

Looking at one here but unsure what the standard floorplate will give since it is blocked at the back vs. a standard m7.

Considering an MDT chasis to run AICS mags but not seen many (if any!) of these even on the interweb.

Cheers!

Just back from a couple of nights away hunting. Mine is the newer M7 with the block in the back of the mag, i can measure it up and let you know max OAL

Originally Posted by caberslash

@GWH @gimp

Could you help me out and let me know what COAL's you are getting with your M7 .223's please?

Looking at one here but unsure what the standard floorplate will give since it is blocked at the back vs. a standard m7.

Considering an MDT chasis to run AICS mags but not seen many (if any!) of these even on the interweb.

Cheers!

My M7 223 is a late model one, it has the spacer in the back of the mag, the bolt face does come back behind the space thou, so you could potentially play with removing th spacer to allow longer COAL (as long as the throat in your chamber allows a longer coal)

The max mag length with the spacer in the internal mag appears to be 2.34". Im running my loads at 2.280"