Thread: My 7mm SAUM

Hi Dreamer, nice shooter fella. I had NZ Hunter build a 7saum with a pierce titanium action a year or two ago. Came up well and shoots top notch. Good calibre eh. Not over the top power wise and brass is on hand so all good. I use 160 tmk's in mine at about 2975fps. 59 grains of reloder 23, Norma case and a cci primer. Good luck with it.

Originally Posted by Ginga

Hi Dreamer, nice shooter fella. I had NZ Hunter build a 7saum with a pierce titanium action a year or two ago. Came up well and shoots top notch. Good calibre eh. Not over the top power wise and brass is on hand so all good. I use 160 tmk's in mine at about 2975fps. 59 grains of reloder 23, Norma case and a cci primer. Good luck with it.

Hi Ginga what length barrel did you go for I was thinking of trying the 160 TMK in mine.

Sent from my SM-G920I using Tapatalk

Originally Posted by Ginga

Hi Dreamer, nice shooter fella. I had NZ Hunter build a 7saum with a pierce titanium action a year or two ago. Came up well and shoots top notch. Good calibre eh. Not over the top power wise and brass is on hand so all good. I use 160 tmk's in mine at about 2975fps. 59 grains of reloder 23, Norma case and a cci primer. Good luck with it.

That sounds like a very nice build mate and knowing Duley it will be!
Thanks for the load info, I've been thinking about trying the TMK's. Got some bergers loaded up to try at the moment. The 162 eld-x shoot real good at 100m but didn't group to well at 545m when I tried them. Will retry them though.

Oh yeah got a 2 inch group at 5 hundred verifying drop. First two shots at an inch and the third took it out to two inches. Might have been a fluke but I'll take it!

A very nice looking shooter there my man, top shelf componets and gunsmith,gotta be good