Hi
Is anyone dialling their Nikon Monarch scope? I have a 2.5-8x32 Nikon Monarch that I'm thinking would go well on an all purpose 5 to 500m rifle...but will the scope be repeatable enough?
Kj
Printable View
Hi
Is anyone dialling their Nikon Monarch scope? I have a 2.5-8x32 Nikon Monarch that I'm thinking would go well on an all purpose 5 to 500m rifle...but will the scope be repeatable enough?
Kj
Hey KJ
I have 2 monarchs, one on my 7mmRM, have shot out to 900 at NRA with it using the nikon spot-on programme for click adjustments, bang on with my handloads and returns to zero each time, can't fault them for repeatability.
I reckon they are the business!
Sweet, thanks for the reply. I didn't want to delude myself and just end up wasting ammo...but if it does work it will be an awesome little package with the short light little rifle and smaller scope.Quote:
Originally Posted by Spudattack
Kj
I think you will be pleasantly surprised how good they are, they punch well above their price tag!
Personally I'd take Spuds word for it but if you doubt your scope put it on the .22lr and play with it clicking it around and so on. Cheap way to check it
I have a Monarch 4-16x42 which I haven't gotten around to do a box test on yet.
If I get a chance I'll try give it a go this weekend and let you know how it goes.
Cool, thanks for the replies. Will give it a go when the new shooter is finished too.
kj
I have one and it repeats well.
I did a test this on Sunday morning. I have taken pictures, and if I can be arsed will write up a review on the scope.
But anyway, yes the scope tracked well.
I ran the turrets through there full range of travel, up, down, left, right and repeat a good four or five times, and fired another group. Did this twice and it came back bang on.
Then fired a group, went up 5moa a group, left 5moa another group, right 10moa another group, and then back to zero.
It zeroed perfectly, and the adjustments were correct, for the 98yards I was shooting from.
I really like this scope, I should pull finger and write up a review on it, I've only had it two years.
MONARCH 3 4-16x42 Custom XR Turret from Nikon
Natchez (US) have got them.
Be hard to go past them for value. The MOA dial would be fine.
Shhhh.....don't tell everyone! They are a well kept secret, if everyone knows how good they are the prices will go up! ;)Quote:
Originally Posted by Tahr
Except that they only have 44 moa of elevation.Quote:
Originally Posted by Spudattack
What range will that give you with a .308, would imagine further than it is realistic to hunt with it?
half of that will get to 760 yards with a 168 amax @2750fps or if you could use all 44moa 1100y
So plenty then!
More than 99% of NZ hunters would ever use.
Sent from my RM-915_apac_australia_new_zealand_214 using Tapatalk
yep, a 15 moa rail and you would be good to go on gongs.
Hey KJ, how are you finding the monarch?
Yes, have you been out and used the turret's on yours?Quote:
Originally Posted by Spudattack
I heard that they don't track well, but mine does and if yours does too then we might be able to say myth busted.
I shoot my 223 at 500m a few weeks back, scope tracked perfectly after going between 500m and 250m, now it's back to it's 100m zero it's still bang on.
Mine track perfectly, been out to 900 with the 7mmRM and bang on each time from a 100 zero.
Hi guys, sorry I haven't had time to shoot it yet. Lots on this time of year with hunting taking priority over all else...we'll that and my new V8 which is consuming both a lot of time and money...
Will get around to shooting it next month.
Kj