hi team,
mate dropped me a Norinco .22 bolt action.
the mags delivering the last 3 round with the tip of the bullet too high for the chamber to feed ie its sticking too far up.
any quick fixes/mods or is if buy and new one time?
Thanks
M
Printable View
hi team,
mate dropped me a Norinco .22 bolt action.
the mags delivering the last 3 round with the tip of the bullet too high for the chamber to feed ie its sticking too far up.
any quick fixes/mods or is if buy and new one time?
Thanks
M
Is the tip too high or is it the whole bullet?Quote:
Originally Posted by rogers.270
If the latter does it feed any better if you don’t push the mag all the way home?
Just the tip bud
Clean it first, esp the inside of the back of the magazine, if that doesn't work, then tutu with the feed lips (close the front of the feed lips ever so slightly, like a tiny amount)
Quote:
Originally Posted by rogers.270
I had that issue a while back and moving the mag higher actually got the bullet more lined up, push the mag higher and give it a shot.
If that doesn’t work try it in conjunction with queezing the front lips together a few thou, that may assist in holding down the nose of the bullet.
.....thats what she said :PQuote:
Originally Posted by rogers.270
Shot team ill give it a whack tomorrow. Its a 5 shot, ive had norincos before no probs
difeerent 15s like diferent projectiles....one of mine hated power points but loved superspeeds... current one is fine with either.
I put up with this for 2 years. Bought a polymer cz452 mag. Problem solved, feeds perfect! Played around adjusting the lips on the original steel mag and works ok now. But make sure you only bend the lips i made the mistake trying to bend them and in the process bending in the body and the follower was getting jammed about the 3rd round.
Sent from my SM-N960F using Tapatalk