just bought one anyone know how to tell the age of the rifle from the serial number cheers
Printable View
just bought one anyone know how to tell the age of the rifle from the serial number cheers
fucked if I know how to awncer your question mate but I know they are a fantastic rifle very accurate is it standard or rebarreled 223 or 308?
I've had two and always regret selling so if you sell it let me know
chuck up a photo or 2 mate
Its on gun porn thread she's a 308 be interesting to see how it goes should be a nice cheap tackdriver :)
From what I can figure out its the later type apparently there's a m44 and m44b mines a b just be interested to see how old it is
both mine loved 155gn smk bullets if the tube is good it will shoot bungholes at 100m I won a 200m fclass at nzda with one of mine aganst rifles worth 6 times more both mine only set me back about $400 but that was 5 or so years ago
OK I'll have a look for some was going to try some hot cores in it
its a target rifle it will be barreled for longer pills
mine also shot the south African milsurp that you could buy 160rnds for $80 but ya cant buy that now:( I sold all my 308's when that dryed up as not worth owning one when you have to hand load anyway and there's better cals such as 6.5 out there but the omark is one I should of kept
The hot cores shoot well in the 6.5 that's why I want to try them in the 308
If it has an original barrel it was set up to shoot the 144gr projectile in vogue at the time. More than OK to stabalise 155gr.
If it is a 44B it will have the larger diameter pin locking the bolt head. The smaller pins in the first 44 are a safety issue - a reported history of them breaking and potential for the bolt head not being retained. The pins can be fractured by dry firing.
This doesn't help with a date but gives I think a sequence of manufacture
Sportco serial numerics
I have one with DL in the serial number. The old fullbore shooters probably knew the significane of the nubers off the top of their heads :P
Mines got the big pin s/no starts sdl
Original barrel? Should have said that the original barrels will stabilise 155gr OK. Bit generous saying "more than OK" in my original post.Quote:
Originally Posted by northdude
Triggers can range from vg to kerap. Mine when I got it was kerap. Lots of slop in pins. Someone had attempted to tighten them by centre punching around the holes. Trigger release with each shot was a lottery.
Not sure how to tell if its an original barrel trigger feels good but a little heavy
I bought a model 44 at an auction a year or two ago that belonged to Viv Collings. It has been worked over by Din and has a really good trigger . I have never fired it as it is missing its rear sight but I intend to put a scope on it at some stage and if I can get Allan Carr to fit it. From all accounts they are a good rifle. Mine is in 308
both mine the triggers were nice about 1lb or so with a clean break you could probably get a smith to tickle it up for you if its to heavy
Original barrels had the integral locking arrangement for the bolt locking lugs as part of the barrel. Rebarreled ones (except where maybe an original barrel was sourced and used) have short adaptors fitted for the bolt locking lugs to engage and then the aftermarket barrels are simply be screwed into the adaptor. The first model 44 aside from having the smaller bolt head pin had skinnyish barrels. The 44B had the larger locking pin and heavier barrels.Quote:
Originally Posted by northdude
ok maybe its an original barrel its not skinny either cant wait to try it out hopefully sunday one of those adaptors sounds like it would be handy to have i like ebfs one he did i might be able to get a left hand stock to suit it
The triggers can be replaced with any that will fit a Rem 700 mine had a Shilen 2oz now it has a Timney, there used to be some three lever conversions around don't know who did them
had one on an Omark I sold should have swapped it out before selling it was better than the Shilen, a good mod is to fit a SA Rem 700 main spring Omarks are well known for light strikes
thanks for that info i want to do a few things to it its going to be a bit of a project