Printable View
I noticed that there are an abundance of these things coming up for sale and generally at very good prices.
My friend has a Omark 44 308 single shot that he shoots frequently and it is easily a 1/2 MOA shooter.
My question is could a competent gunsmith convert one of these actions to a repeater and use an aftermarket AICS style Magazine feeding system?
Seems like an affordable start point for a custom build.
Thanks,
F.
best to speak to several gunsmiths and get estimates.
the aus army apparently looked at converting omarks to magfeed, but the cost was prohibitive
omarks do have some quirks :
primary extraction is not flash, so if you plan on using hot loads, you may end up running into some issues. there is a fix (weld a blob onto the bolt handle where it cams, and machine it down for correct clearance) but you will not be at the level of something like a barnard
the cross-pin on the floating bolt head is a weak point, to be allowed to shoot on NRA ranges in NZ that has to be beefed up to a larger diameter pin
re-barrelling is the major headache (lugs in the barrel). nielsen adapters solve this issue, but some gunsmiths do not like them as they feel it leaves the tang area too thin.
I suspect you would be better of blueprinting a remington action and sleeving it if you want additional rigidity. more options for stocks and accessories.
Like ebf said, I have a Omark 44 with all the mods Nielsen adaptor bolt head pin removed and wielded up Timney trigger the Omark takes Rem 700 triggers the original Omark can be modified to a three lever I had one makes them
very good but probably cheaper to fit a Remington, It's fitted with a True-Flite 30" 1 in 13" PALMA .308 barrel I built prone stock for it, It is a 1/4" MOA rifle but it still not a Barnard I have one of those as well, if you want a long-range rifle on the cheap they are great, with the Nielsen adaptor changing barrels is easy any of the .308 case size calibres will work, in OZ there are 5.56/.223 conversion kits available the firing pin spring needs replacing Omarks are prone to light strikes mine has a 32 pound Wolf spring fitted hits like the hammer of Thor,
You would probably weaken the receiver too much by cutting a magazine well into it, a single shot is not that much of a handicap it's all we had until 1859 when the Sharps .54 cal came out,
Buy one and do the mods over time it won't seem as pricey with the cost spread out over a few months you will still have some thing to shoot while rebuilding it get one with scope bases upgrade the trigger
and you're good to go.
Hey Shooter - which Woolf spring does the Omark take, mine needs a new one but I couldn't find a spec . . . Thanks
Hi Tent Rem 700 SA they are a bit of struggle if you go heavy I would not like to try and take my 32LB one out a standard Rem factory spring should be fine.
are those adaptors you talk about available in nz
The one I have was made by Mike Collings on TM as collingsmike not sure if he still makes them, I think MAB barrels in Aus has them they used to make new Omarks a few years ago look them up they probably have spare parts
Omarks a still popular over there,