Does anyone have or know where I can get a magazine for a Remington 597 .22 a mate of mine has misplaced his.
Sent from my CPH2531 using Tapatalk
Does anyone have or know where I can get a magazine for a Remington 597 .22 a mate of mine has misplaced his.
Sent from my CPH2531 using Tapatalk
Does anyone know where I could get one
Sent from my CPH2531 using Tapatalk
say what you like about gun city they usually have a stash of magazines under the glass counter. could be worth a gawk
From the point of view of some one who has worked on far to many of them
Over the years put magazine money towards something else
Unless it bloody cheap sub $50 even then I would
Have second thoughts
The actions crack
The trigger housings break
The hammers break
The sears break
Firing pins break
Guide springs collapse
Magazine lips wear out
Bottom of the mags break off spilling there guts in the grass
And that was just the 22lr ones
The other 17 and 22 mag ones would explode
Most of the time sending shrapnel into the shooters
Arm
One good thing about Remington going under was
Not seeing them on a regular basis
They are a really nice rifle - until the mags start giving trouble. They seem to work for hundreds of rounds, then all of a sudden they won't feed because the cartridges jam in the mag. Plastic or alloy mags same thing. They need to be spotless inside, any residue and your trouble begins.
A shame, as I really like mine.
I have one and for a couple of hundy it would come complete with the rest of the rifle assuming you are looking for 22LR model . Ive not used it in at least 10 years
From memory mag worked fine as long as you only loaded 8 rounds
Trust the dog.........................................ALWAYS Trust the dog!!
those guns are trash.
the universe is telling you to buy a 22 that does not suck.
It's not mine it's a really rough on rifles farmer I know down the Waiarapa
Sent from my CPH2531 using Tapatalk
Might be better to get a 10/22
I've had my 597 for over 20 years and not had anything break on it.
It was an unreliable POS when I first had it but replaced extractor and it's been pretty good every since.
Not like it runs perfectly but it's certainly not a complete POS.
There were some mags floating around in the FS section a few years back, I'd put a post up there and see if you get any bites.
Bookmarks