Remington 700 trigger recall

Hey guys. Has anyone had to have their rem 700 sent back and trigger fixed? They did a recall for triggers causing the rifle to fire on its own. Just not sure how it's going to work if the couriers are no longer shipping firearms. I was hoping to head out for a hunt in a couple of weeks, but can't risk it if my trigger is faulty. I searched the Remington site with my serial number and it came up needing to be changed. I'm asking here as the email Remington supplied bounced back.

Ive been using a Remington 700 with standard trigger since 1989 with no problems.
Main thing is not to point it at anything you do not intend to shoot.

Simple fix don't load the chamber till your about to pull the trigger

Quote:

---

Originally Posted by mickey

Ive been using a Remington 700 with standard trigger since 1989 with no problems.
Main thing is not to point it at anything you do not intend to shoot.

---

Na this was only a QC issue on rifles made between 2009 and 2014 I think

Quote:

---

Originally Posted by Paddy79

Simple fix don't load the chamber till your about to pull the trigger

---

Yeah in hindsight that seems the most obvious thing to do, thanks

Some places were doing a deal where you could get a Timney trigger installed and just pay the difference. Cheap upgrade to a Timney.

Quote:

---

Originally Posted by GDMP

I have swapped out dozens of 700 triggers in their recall programme.....in all honesty the triggers I removed seemed fine to me,I doubt most of them actually need swapped its more of a butt-covering exercise for Remington.If you like your trigger and it operates reliably then just use it on your hunting trip.

---

Did you replace them on behalf of Remington? Or for your own rifles? Did they just send you a replacement trigger?

I’ll be interested to know how you get on @CamFlatt. My serial number came up as ‘may be’ affected by the recall... I thought my trigger was pre- XMP though, as it’s not externally adjustable. Any of those places you mention in Canterbury, @systolic?

Quote:

---

Originally Posted by mopheadrob

I’ll be interested to know how you get on @CamFlatt. My serial number came up as ‘may be’ affected by the recall... I thought my trigger was pre- XMP though, as it’s not externally adjustable. Any of those places you mention in Canterbury, @systolic?

---

Not sure. I got mine done through the importers up in Auckland. Outdoor Brands I think it was. My local shop sent it off to them.

Quote:

---

Originally Posted by systolic

Not sure. I got mine done through the importers up in Auckland. Outdoor Brands I think it was. My local shop sent it off to them.

---

Yeah it is still outdoor brands according to the Remington website. Though I suspect the email bounced because the initial recall was a few years ago. I sent them an email, but have heard no response do far. Also hasnt answered their phone. Will try again monday

Thanks @GDMP, I’ll talk to my local Smith. My email to Outdoor Brands also bounced back

Quote:

---

Originally Posted by GDMP

On behalf....customers rifles.....I work in the trade.Customer contacts us and gives us the serial number,we contact the NZ Rem distributor with said number....they tell us if that particular rifle quaifies for the recall, if so we fit a new trigger and send their old one back to the NZ Rem distributor.

---

Thanks. Do you still replace them? Would it take long? I could always pop up to chch for the day sometime

Checked mine and has already been done. Has the 'dot' stamped into bolt release.

Quote:

---

Originally Posted by systolic

Some places were doing a deal where you could get a Timney trigger installed and just pay the difference. Cheap upgrade to a Timney.

---

This is what I did via local Hamills.....what a difference! This was a few years back now....

Quote:

---

Originally Posted by mopheadrob

I’ll be interested to know how you get on @CamFlatt. My serial number came up as ‘may be’ affected by the recall... I thought my trigger was pre- XMP though, as it’s not externally adjustable. Any of those places you mention in Canterbury, @systolic?

---

So I called outdoor brands, and they will send the trigger down to my local gunsmith, who will replace it at my cost(he's also going to adjust the pull for me too). It would have been free if I could get the rifle up to gun works in chch, but thats 2 hours drive from me. Cheaper just to get the local guy to install. Only issue is it's not covered under warranty, but I'm getting him to adjust anyway.

Any ideas who in Wellington area would do the swap of the trigger

I did the upgrade to a Timney as well. Good way to get a trigger job.

I did it
When to remington site, entered the number , told.me it was a effected rifle and to to contact collings and Bradley in chch.
Had to send it down to them and they replaced the standard base model trigger with the xmark pro 2 adjustable trigger,
It was a big improvement
So i was pretty happy

Quote:

---

Originally Posted by jim160

Any ideas who in Wellington area would do the swap of the trigger

---

Pm'd you @jim160

They replace the original 3 screw adjustment walker triggers.

Purely for legal reasons as the walker is very adjustable for sear engagement, over travel and pull weight. Bubba jobs can make them in safe.

They are a far superior trigger to the X pro. The Timmey is similar to the walker.

I Would not swap it out just check your original trigger passes the drop test, as that is what poorly adjusted ones were failing.

just resurrecting an old thread and have just googled rem 700 trigger fix and this popped up .turns out my trigger is part of the recall. not sure if it has been done as i bought rifle second hand .where do i find the "dot" .who in wgtn can sort this. cheers sig

Quote:

---

Originally Posted by sig4x4

just resurrecting an old thread and have just googled rem 700 trigger fix and this popped up .turns out my trigger is part of the recall. not sure if it has been done as i bought rifle second hand .where do i find the "dot" .who in wgtn can sort this. cheers sig

---

Maybe contact the NZ importer. They should know the details

www.outdoorbrands.co.nz

Quote:

---

Originally Posted by sig4x4

just resurrecting an old thread and have just googled rem 700 trigger fix and this popped up .turns out my trigger is part of the recall. not sure if it has been done as i bought rifle second hand .where do i find the "dot" .who in wgtn can sort this. cheers sig

---

Flip the rifle over and look at the bolt release tab just in front of the trigger. If it has a small punch-mark on it, you’re clear.

I read recently that the Remington is having problems with some of the replaced triggers now.

https://www.cnbc.com/2020/04/06/remi...ine-nears.html

Are you actually going to put the blame on Bubba? :XD:

Quote:

---

Originally Posted by CamFlatt

So I called outdoor brands, and they will send the trigger down to my local gunsmith, who will replace it at my cost(he's also going to adjust the pull for me too). It would have been free if I could get the rifle up to gun works in chch, but thats 2 hours drive from me. Cheaper just to get the local guy to install. Only issue is it's not covered under warranty, but I'm getting him to adjust anyway.

---

Put it in yourself mate. easy as, numerous videos and how to do tips on the net, did my first change this way.

im happy enough to fit .do a lot of my own gunsmith stuff anyway.may have to get intouch with outdoor place and chat to them about it

Sent from my SM-G935F using Tapatalk

The new lawsuit looks to have been shut down for now - see here:
https://www.cnbc.com/amp/2020/06/20/...omplaints.html