Who makes a ring which fits 16mm dovetail (CZ 527) that fits 1" scope but the ring height is say 5-6mm?
Printable View
Who makes a ring which fits 16mm dovetail (CZ 527) that fits 1" scope but the ring height is say 5-6mm?
Closest I can find is this
1" CZ Centerfire 527 (for Dovetail Setup) - Talley Manufacturing
0.5" height though.
Don't you need a reasonable height to clear the bolt handle lift.
@jakewire Yeah I've seen those but high as.... You do unless you introduce a grinder to the bolt.
Attachment 39879
Very good. in that case sorry, can't think of anyone else, leupy are higher I think.
Have it drilled and tapped and mill the bottom of some Talleys to suit?
I have got a brand new set of beautiful Parker Hale rings that would look fantastic. Sixty dollars includes post. Cheers, Gary 06 8443299
Would it work if I bought some Leupold weaver mount rings and took out the little aluminum bar?Quote:
Originally Posted by gimp
PM'dQuote:
Originally Posted by garyp
Does anyone know if you can take out the recoil lug on these and fit them to a 16mm dovetail?
http://www.guncity.com/warne-weaver-...e-rings-220904 Oh and reloaders has it for 1/2 the price!
Edit: yep so that little lug can be removed, next question does it fit 16mm dove tail?
On mine I carefully filed the bolt handle right down myself (and then had it professionally reblued). I sourced a set of conetrol bases from Richard Wilhems and then used a super low set of conetrol rings which I had lying about. It is now very low - around 7mm from dovetail to scope (much lower than Warnes which is what I previously had) - basically just the height of the base. Also cut the magazine down (mine is 7.62x39) and refitted the existing floor plate - although it protrudes a little (it needs to be because of the release lever), it is now very comfortable to carry.
A couple of terrible photos taken in poor light on my phone are below.. you will get the idea.
Attachment 39882Attachment 39883
You can buy the beautifully made Australian Hilver rings direct that are made specifically for the Brno 16mm dovetail. I use the medium and low on my Brno Model 1 and Brno 581 Auto. BRNO Ringmounts ZKM611 and Early Model 1 and CZ 527 16mm dovetail
I have a spare set of the 1" low, used but in excellent condition, $75.
I also have a set of CZ 1" factory rings for 16mm dovetails that are quite high. Lug has been removed, as new, cost $120, sell $75.
Hey mate, sent you a pmQuote:
Originally Posted by 10-Ring
This fine gentleman is sending me some rings to try (and buy if they work) :thumbsup:Quote:
Originally Posted by garyp
The standard cheap alloy tikka rings work on the cz.
