Hi guys I need a set of 25mm rings for the above, been told Warne make em any experienced hands out there with advice?
Cheers,
F.
Printable View
Hi guys I need a set of 25mm rings for the above, been told Warne make em any experienced hands out there with advice?
Cheers,
F.
Yes, they do make them for 601's. I'm waiting on a set for mine now.
The low ones were a smidge too low for the bolt knob to pass the looky end of the scope so getting the next height up, mediums ?. Will know more on the height when they arrive.
Yeah Warne do, I have some on my 601 in .223. Hold zero fine.. Gunworks sell them. It’s a 19mm dovetail from memory, same as a lot of CZ’s.
Cheers, think it’s a 19mm dovetail from memory.
Anyone know where you can get a second hand stock?
Mine has been shortened.
CZ550 fit from memory.
Cz550 rings every day
Warne are good. The same rings work on Brno Model 21, Brno ZG 47, Brno ZKK 600/601/602 and CZ 550 (excepting the round-top Minnesote and its iron-sighted Scandinavia counterpart).
Warne are good, had some QD ones on my CZ550 .375. I am using Burris steel rings on my ZKK600 7x64, I find them just as good but they look more “elegant” for lack of a better word, the Warnes are quite chunky.
Got them off the optic zone.
Sent from my iPhone using Tapatalk
Warne are good, had some QD ones on my CZ550 .375. I am using Burris steel rings on my ZKK600 7x64, I find them just as good but they look more “elegant” for lack of a better word, the Warnes are quite chunky.
Got them off the optic zone.
Something else that I find is a good addition is a set of hex head action screws from jnpgunsprings.com. In conjunction with the Burris rings it means you can Field strip the whole rifle with just a 4mm Allen key which I keep in my field cleaning kit.
Sent from my iPhone using Tapatalk