I think I do - and I'll buy that extended release from you.Quote:
Originally Posted by planenutz
I've used that particular one on my rifle for a couple years and never lost a mag
Printable View
I think I do - and I'll buy that extended release from you.Quote:
Originally Posted by planenutz
I've used that particular one on my rifle for a couple years and never lost a mag
Any tips and tricks to loosen up the mag in the mag well? Since mines got the screw at rear of receiver fitting into the stock the mags don't want to drop out under gravity and need to be yanked out or shaken. Any it's or is it just a good excuse to go from the standard 10round to a 15 so there's something to grab to pull it out and a bit more weight
Also discovered my safety is a bitch to flick off, push partway push back to safe then push all he way to fire. Is it possible that it has rotated somehow? Anyone tried putting a left-handed safety in? If I'm going to take it to bits I might chuck a more appropriate part back in
where do you get the flush magazine releases from? My partner and myself have lost a magazine each :(
Have brought a few things of a guy on trade me, alladinz or something good to deal with.Quote:
Originally Posted by swellacott
When you find out, let us know. I lost a mag last week and I'm still pissed about it.Quote:
Originally Posted by swellacott
Just cut the extension tongue off the latest factory catches, pretty it up with a file and sandpaper, and you have a flush mag release. End of problem! Tight magazines need dressing a little on the 4 vertical corners. A 1mm 45 degree chamfer cut with a sharp chisel will do the trick.
My problem isn't the mags it's the mag well as its only occurred since I had the bolt put in the receiver, has aimed the barrel up a bit, suspect that's why my safety doesn't work as well. Will try your idea of altering magsQuote:
Originally Posted by gundoc
My daughter Mikayla (12) was doing ok with the standard rifle but I noted the difficulty she was having with the standing shots.
Attachment 63086
Her smaller frame meant it was difficult to shoulder the rifle correctly so a change was needed. I purchased an old beat-up wooden stock off TM for SFA and set about making some changes. I don't like the standard stocks much at all so anything was going to look better than what I had.
First I trimmed about 2" off the back. By chance this worked out to be about perfect. I cleaned up the butt and using my best wood-working skills plus some cursing and swearing, got the plastic protection to fit.
Next I trimmed a bit of meat off the fore end of the stock. The primary reason for doing this was to make it easier for smaller hands to hold on to. I based the shape on a Winchester M70 Featherweight I have. Mikki indicated this change was an excellent one and she can now hold the fore end much easier. I guess it might have reduced the weight a bit too, although bugger all. I drilled a bit of meat out of the butt of the stock too. While I was there I made sure the barrel was floating correctly in the channel too.
Attachment 63087
Attachment 63088
Attachment 63089
After a bit of sanding, some good ol' fashion elbow grease, a few coats of Birchwood Casey Stock Varnish, more elbow grease and finally some TLC, the finished article was handed over for field trials. It was an instant hit - no pun intended. Funny enough, Mikayla now refers to this as "her gun". Hmmmm.
Without checkering on the stock I thought the rifle was looking a little... bland. I wanted to tart it up but I don't even know how to use a chisel, let alone own one. I mulled over the options but left it alone for a few months. When my son was given a craft set for Christmas I noted the small "V" chisel inside the box and the brain started churning out ideas. With no skills and very little appreciation for the time and effort involved I set to. I now believe those guys in European factories who do this as a day job need to be paid more.
The final result was rough enough for the money I got paid and Mikki is rapt with the new addition.
Attachment 63090
Attachment 63091
Next stop - the local Marae. Maybe I can whip up a bit of carving for the Wharenui.
Being the cheap bugger I am, I used to fashion the V carving tools out of umbrella ribs, and tickle them up on the bench grinder.
the number one improvement is a good trigger job, then a plastic buffer pin. then get rid of that dovetail base and put a weaver base and rings on
...done the trigger job - it's very nice now... plastic buffer was done years ago. Suppose the Weaver base is next then.Quote:
Originally Posted by gonetropo
And they cost bugger all....Quote:
Originally Posted by planenutz
Attachment 63450
Pewpewpew!!
Reviving an old post as I have just got a 10/22 and looking for any tips on accurizing it.
