The surface of the stock has gone all sticky. Has anyone else had this problem and can anyone suggest a solution to the problem?
Printable View
The surface of the stock has gone all sticky. Has anyone else had this problem and can anyone suggest a solution to the problem?
I have used acetone and a Scotch Brite pad before on a motorcycle dash that had gone sticky. Not a Sako stock but might be worth a go?
I have heard of it happening to Sako synthetic stocks, it’s rare but it happens
There was a thread on it here years ago
Was that black bear stock a little sticky?Quote:
Originally Posted by 7mmsaum
Sent from my iPhone using Tapatalk
Check out Murfs Precision on FB they remove it with a thinner from super cheap and can recoat it, I'm going to get my carbon light stock done as it's coming off.Quote:
Originally Posted by garyp
Sent from my CPH2145 using Tapatalk
No it’s as good as goldQuote:
Originally Posted by MSL
Gave it a clean with dish washing detergent and it came up looking really good
I would have sanitised it properly;)Quote:
Originally Posted by 7mmsaum
Only incineration would sort that…Quote:
Originally Posted by Gibo
Sent from my iPhone using Tapatalk
Got a 95 % new, walnut 85 stock small action 243,7m08,308 I will let go for 300 with a lim saver recoil pad, if anyone is interested
Do you still have the original recoil pad that can go with the stock if purchased ?Quote:
Originally Posted by flock
Yes, but as to keep the standard over all lenght of pull with the lim saver, I adjusted the stock lenght by 7mm.
The lim saver is a hugh improvement on the felt recoil. Have all the bits but never considered putting it back. The limsaver was 100 by itself.
Not trying to hijack you flock, I also have a Sako 85 Hunter walnut stock, all original that I will be selling. I'm heading into the hills for 10 days so out of touch until then. If someone reading is interested, feel free to reach out with a PM and I'll be sure to get back to you. JoelQuote:
Originally Posted by 7mmsaum
my 85 stock became a disaster - sticky as hell...... nothing fixed it........ had to buy after market hitech