Printable View
Would any of you who own Vixen L461's in .222 be kind enough to take a few mins to measure the action screw specs?
I'd like to know the overall shaft length, and how much of that is threaded. If you know the thread pitch, that would be useful too.
Would be very grateful. :)
Cheers,
AJ
Same thread as Tikka T3 action screws. I used Tikka screws on my one in a cf stock as I needed a bit longer.
Sent from my SM-A530F using Tapatalk
Well that makes things a lot easier! Cheers.
Here’s some pics let me know if you want more.
Attachment 113457
Attachment 113458
Cheers man, appreciate it. :)Quote:
Originally Posted by Shootm
The custom screw maker only makes Allen screws. If Tikka T3 screws (in torx) fit as per what Mathias says, then I might be best going down that route.
If you do go down that route, get some stainless ones from Gunworks
https://www.gunworks.co.nz/shop/item...-action-screws
@Seventenths
Are these torx or allen?
Exactly the same as the T3’s so they’ll be allen
Be aware that J&P Custom Products charge $39 USD to send two screws to NZ - no exceptions. The 6mm x 1 screw's you're after can be bought elsewhere or made yourself. Any engineering supply business should have them in hex head of various lengths. You can bevel the head and cut to length. The length of the screw section shouldn't make any difference.Quote:
Originally Posted by Frodo
Yeah, too dear. I ended up buying a couple Tikka T3 screws from Gunworks. About $20.00.Quote:
Originally Posted by 10-Ring
Service was good. Got them the next day or so.
