Does anyone swap between the two as I was wondering if the POI changes.
Sent from my SM-G920I using Tapatalk
Printable View
Does anyone swap between the two as I was wondering if the POI changes.
Sent from my SM-G920I using Tapatalk
Yep around 6.5 moa on my 50 BMGQuote:
Originally Posted by 25/08IMP
Common sense tells me every situation is different, and there's only one way to find out.
Common sense would also suggest you can't add half a kilo to the end of a barrel without significantly affecting the mechanical harmonics and therefore the zero.
On my short fat 308 barrel, very little little difference between the 3( suppressor, no suppressor and brake) but as said above any longer and thinner barrel and you have to re zero for the device used.
And as a result I would think that would also affect load too. Anyone have real world experience with finding a different load for best results with suppressor/brake?Quote:
Originally Posted by 6x47
on my 16" 223 very little diff, <1", on my 24" 308 was about 5"