takedown rifles.

Any one got one,
would like sum thing a bit more compact and less obvious when traveling around the country, and with a two barrel system, perhaps a bit less bulk, to have in ute and boat.
Quick assembly with no tools.
looking at mauser m03, merkel helix, sauer 202 takedown, verney carron impact bolt action.
Have found a Verney-carron in 9.3x62 for $2400, and merkel's for $3000-3500. Cad.
I know there is plenty of blaser users, but I believe you need tools to assasamble,
Has anyone got, owned or used any of the above rifles.
your thoughts.

Used a baikal single shot culling goats, worked well

Go Sauer , with steel action , even the std ones break down , so no reall need for the dearer takedown versions , most use 3 bolts that clamp the action , then the barrel slips out , bolt locks direct into the barrel .

The Blaser uses an allen key, take down & reassembly in an easy minute. Have found mine to have a very repeatable point of impact - I haven't personally handled the others you have mentioned so can't comment on those. The Blaser platform is certainly very proven & barrels easy to source etc. I love mine & wouldn't trade it for anything :thumbsup:

This took me 26 seconds to break down with the supplied tool. Would have been faster but I was eating a bit of toast.😊

http://images.tapatalk-cdn.com/15/04...fcba3e58b2.jpg

Quote:

---

Originally Posted by R93

This took me 26 seconds to break down with the supplied tool. Would have been faster but I was eating a bit of toast.��

http://images.tapatalk-cdn.com/15/04...fcba3e58b2.jpg

---

You've lost your plastic washer :D.

R93, thank you for that info, Looks like the Blaser is an option, I thought there was more to dissasambly on them,
Can you confirm, the screws are held in the stock, ? can't readly be lost ?
Have a few prices coming in, no such thing as cheep and takedown in the same sentence,

Baikal, 400 bucks. goes together in 5 seconds with no tools

Action screws are retained in the stock. There is really nothing to lose unless you are careless.

Quote:

---

Originally Posted by kiwijames

You've lost your plastic washer :D.

---

No. Just run out. I have sourced some new ceramic carbon fiber composite ones. They should last at least a week.
I will send you some😆

Whatever rifle you buy get some barrel bags in bright colours if you get other calibers.
Almost left a barrel in the hills one trip.

Quote:

---

Originally Posted by R93

No. Just run out. I have sourced some new ceramic carbon fiber composite ones. They should last at least a week.
I will send you some[emoji38]

---

Me as well please.


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by BRADS

Me as well please.


Sent from my iPhone using Tapatalk

---

I have only got 2000 of them ��Righto ....I will send ya some.

You could consider an AI as well. Apparently you only need a fuck off big barrel vice, a fuck off big action wrench, some go, no go gauges and a coupe other items to break them down or change barrel.

Apparently they are good as a hunting or varmint platform.... Apparently.

Quote:

---

Originally Posted by Proudkiwi

You could consider an AI as well. Apparently you only need a fuck off big barrel vice, a fuck off big action wrench, some go, no go gauges and a coupe other items to break them down or change barrel.

Apparently they are good as a hunting or varmint platform.... Apparently.

---

I thoroughly enjoy your posts @Proudkiwi [emoji23]

Quote:

---

Originally Posted by R93

I have only got 2000 of them ��Righto ....I will send ya some.

---

Me Three! The ceramic carbon fiber ones will save at least a few more grams :wtfsmilie:

Modern Firearms - Kel-tec SU 16

Thompson/Center Encore® Accessories : Cabela's

Thomson center Encore or contender depending of the caliber range you want.
That is what I recommended for a mate to buy. Once taken apart it stays in a small bag when mountaineering.

On the contender you could have a22 lr+ a 204 or 223 + a 30-30+ a 44 mag and a 410 barrel.

On the encore a 223 or 22-250, + a 308 or 270 + a magnum cal and a 12 gauge barrel.

Of all these one which I saw was fantastic for a change barrel system. Price may be out of your budget depending on what you find, but check out the Kreighoff "Semprio" Oh my god. I had the pleasure of handling one and it was absolutely fantastic. the action was sooooo smoooth. Slick and simple. Fast and very very well made. I hat eto think of what it would cost but I am sure it will make those others look like any old rifle in the discount bin.

https://www.youtube.com/watch?v=pcb4w5iTWI4 its a bit long but worth watching.

Hs precision has a takedown option as well, can be done with multiple barrels but doesn't come cheap either.

Quote:

---

Originally Posted by 7mmsaum

Used a baikal single shot culling goats, worked well

---

+1

Get a single shot and try it as a 'proof of concept' at least.

How about this one Blaser K95 | Trade Me not too expensive

Quote:

---

Originally Posted by stug

How about this one Blaser K95 | Trade Me not too expensive

---

Shit that's 29 tikkas
Or 11 sakos......


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by BRADS

Shit that's 29 tikkas
Or 11 sakos......


Sent from my iPhone using Tapatalk

---

Still.......

But it is a nice Blaser

Quote:

---

Originally Posted by stug

How about this one Blaser K95 | Trade Me not too expensive

---

Guess it was a special order too. Not many rifles would be engraved with Chamois, Tahr and Reds.

Update, got a few prices coming in at the moment, one of the biggest problems, is unable to handle any of the rifles I am most interested in,
Have discounted the BLR due to repeated reports of not returning to zero,
Have a luxus single shot been sent to me for a try, out, not a fully takedown rifle thought,
And think I have a Mauser M03 lined up for a few shots,
Currently, Considering a Verney Caron bolt action, take down in 9.3 x 62, and a second 7x64 second barrel, for $3700 as the best value, repeater.
Sum very nice rifles out there, esp. in euro doubles,

H.S.Precision Varmint takedown | Trade Me

Have handled this rifle.......heavy but NICE!

I dream of that every time it's listed, I think my wife is worried that decided it a need and buy it!