Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Delta Terminator


User Tag List

+ Reply to Thread
Results 1 to 6 of 6
Like Tree1Likes
  • 1 Post By dogmatix

Thread: trouble with Superlative Arms Adjustable Gas Block

  1. #1
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468

    trouble with Superlative Arms Adjustable Gas Block

    OK so question im using a promag 5 shot and i'm starting to wonder if its not coming up and holding the bolt back but some times it is.... hence i feel like i'm running around in circles, ive had it hold the bolt back at 18 clicks out(max gas pressure) also at 27 also down to 14 but ive also had the opposite and its getting really frustrating as to what the thing actually wants... as i think the mag is giving me dramas ? pretty sure i'm not doing it wrong seems pretty simple, is there something else it could be ? seriously think its the mag....? i did see small amount of powder residue coming out the gas tube rear of the gas block too?

  2. #2
    Member Beavis's Avatar
    Join Date
    Dec 2011
    Location
    Taupo
    Posts
    4,834
    Obvious thing to do is try another mag

  3. #3
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    Would if I had one, but any one rate pro mag ever had issues etc

  4. #4
    Grant grunzter's Avatar
    Join Date
    Dec 2013
    Location
    Auckland
    Posts
    958
    A long time ago in a galaxy far, far away, I found the 5 shot promag's a bit average, sometimes perfect sometimes not, but problems normally related to FTF, not bolt hold back.

    You could pop off the gas block and double check the position in relation to the barrel step, as I've seen in some cases its a little out, so may be messing with you, also double checking vertical alignment is all ok... just an idea...

  5. #5
    res
    res is offline
    Member res's Avatar
    Join Date
    Apr 2014
    Location
    Quebec
    Posts
    3,379
    I would be trying another mag, maybe find someone in your area to borrow one from? A lot of the reduced capacity mags seem to be temperamental and pro mag famously so.

    Is your gasblock lined up correctly. If the hole in the barrel is partly covered it could explain why the block needs to be fully open
    Using Tapatalk

  6. #6
    Member dogmatix's Avatar
    Join Date
    Dec 2011
    Location
    Northern Gaul (Pukekohe)
    Posts
    5,775
    My experience with Promags is that the brand name is a bit misleading.
    Crap finish and fit, rust easily, floor plates locked in place and sharp edges.
    Amateurmag, Backyardworkshopmag or Averagemag is more accurate.
    AzumitH likes this.
    Welcome to Sako club.

 

 

Similar Threads

  1. DIY adjustable gas block
    By specweapon in forum Firearms, Optics and Accessories
    Replies: 10
    Last Post: 05-07-2014, 06:48 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!