-
Weaver bases help
I'm replacing the weaver bases on my CG small ring 96 Mauser, outdoor supplies says use base 55 and 46.
The ones on the rifle are fucked and i can't see a model number for the front base but the rear one says 24 on the top.
Are the hole patterns different between the bases? Ie if I buy the correct ones as per the website will they fit in to the already drilled holes on the rifle?
-
Weaver Bases Mauser 96
Yep they have got the right numbers
Weaver - Scope Mount Charts - Detachable Top & Side Mounts
I have an Excel chart somewhere with the hole spacings if you want me to dig it out, in the depths of my untidy PC
-
BASE LENGTH HOLESPACING DIAMETER THICKNESS PROFILE SCREW SIZE
46 1.168 0.86 1.29 0.222 D 6-48x.194
55 0.812 0.504 1.05 0.31 D 6-48x.219
Bit hard to read sorry
Hole spacing is meant to be 46 = 0.86", 55 = 0.504"
From a chart about 10 years old but still should be the goods.
-
@zimmer legend. Can you please check the hole spacing for the 24 base? Or just email me the sheet if you want.
-
Should be in your email now