Printable View
How does everyone hang there gongs? Just some wire through a couple of holes at the top attached to a couple of waratahs?
I have 3 of neckshots place but havent had a chance to shoot them up yet, ps if you get more im keen!
Is stainless plate hard enough to handle big guns? I know bisalloy is ideal but looking at what else is out there
What size targets are you using and for what distances
Cheers guys
Chain and two Warahtahs for me.The plate you have is 450 wear plate between that and bizz your only other option is 25mm or thicker mild steel but it dosnt ping that well IMO.as you want feed back from the plate especially if you use a lighter call as they wont move the plate as much so noise is important I think.For me personaly we have our plates in a position were we can shoot them from 100 right back to 500 yds without moving the plate.Walk around with a rangefinder and find the spots you want to set up in and your away mate.Keep me posted .
Ok thanks neckshot, currently shooting out to 1000 on the deck at home but only had shit steel or put up mdf board ect, and go move it when i want to shoot a different distance which is PITA. could go further with the new gun hopefully but range finder wont be up to it yet.
Thinking of permanent gong locations in between, where i shoot to get to 1000 you shoot over two gullys so wind is always changing and i have about 100degrees of shootable locations without moving so will give a variety of winds
Would be keen on a couple more 8x8's and a couple more 6x6's and if you do anything bigger like a 12x12 i will get a couple of them two mate
Cheers for the advice
Yea if I do get some bigger bits your on the list.Awsome idea for wind shooting practice mate nice one.And shooting 8x8 will sharpen you right up.good luck.Quote:
Originally Posted by PerazziSC3
Iv got a bunch of 20mm 12 inch rounds that work well
Im in welly
Hi chrome i think i talked to you about plates earlier in the year, will definetely be in contact again and hopefully organise something
That sounds a lot like what we have mate, I have 4 gongs furthest is 1400, nearest is 330, all shot from the one position, all up high across gullys with wind keeping us honest.Quote:
Originally Posted by PerazziSC3
Gongs are 20ml biz hung by wire from warratahs they gong very well hit buy anything at any range.
I have eight gongs made of hardox 450. They are all circular in shape and hung with chain from Waratah standards. Two are 10cm diameter four are 15cm diameter and two are 20 cm diameter. They are spread out over my property and can be shot at from multiple points with range between 220 up to 900.
My gongs are rather on the large side as I find it easier to use in all conditionsQuote:
Originally Posted by BRADS
to get good at reading wind.
Also very good for building confidence in people who have never shot long range,
What size gongs mate? yep sounds similiar to what i haveQuote:
Originally Posted by BRADS
I agree with you brads. I'd rather have them bigger to see a hit if you are a bit off for whatever reason. You can see groups form in the middle of the gong if its freshly painted. Also I hang the gong off strips of conveyor belt so it can't get shot out like chain can.
I'm not sure mate there bloody heavy all the same size here's cams gun in front of the 1060 yard gongQuote:
Originally Posted by PerazziSC3
I'll measure them latter for you.
Attachment 13989
holy shit!!!!!!! that's big:D That must be your 1400 plate.Id need to weld a few of mine togetherQuote:
Originally Posted by BRADS
Don't call him stallion for nothing......Quote:
Originally Posted by Neckshot
Na mate thats 1060, they are all the same size, but as you can see they get hit in the right place:)Quote:
Originally Posted by Neckshot
Black is saucer size.
Its not about the size of the target for me it's about where you can hit it and in what conditions you can do it.
Pretty hard to see what's happing in the wind at 1000+ with a saucer sized gong
Just my opinion thow .
