GP Optics do the Spectra 1.5-9 x 32i
https://gp-optics.com/product/spectra-6x-15-9x32i/
Still 30mm the but the other boxes are ticked.
Sent from my iPad using Tapatalk
Printable View
GP Optics do the Spectra 1.5-9 x 32i
https://gp-optics.com/product/spectra-6x-15-9x32i/
Still 30mm the but the other boxes are ticked.
Sent from my iPad using Tapatalk
Some interesting suggestions from all so far, and appreciated.
Now; I do have a vx5hd 2-10*42 firedot and also a vxr 3-9 patrol but cannot get either of them as low as the vx3 2.5-8*36 ; well not with the variety of 30mm rings I have tried so far at least. I will do some very careful measurements of bolt lever clearance tomorrow because while a 30mm tube ( none or small objective end diameter) would not be a problem with most 1-8x scopes, the ocular / eyepiece will be. From the bits I've looked at tonight, even the new vx freedom 3-9*42 illume might be a contender with small obj and 41mm 1.63" ocular bell ! Anyhoo I will do measurement and also check out the suggestions made so far. The leupold ar mod1 illum tmr and 1" tube would be ideal but they don't make them any more.
After using a fire dot I would feel naked without it.
@kiwijames . Thats a nice scope but I can't see a price. Any idea of cost?
I have also seen a nice Delta scope but can't find price of NZ agent. Also discovered Weaver are now out of the scope business.
Pm me I was having a beer with him this evening and will more likely see him this Saturday morning again.
[QUOTE=Woody;1053484]I have also seen a nice Delta scope but can't find price of NZ agent. Also discovered Weaver are now out of the scope business. @Sarvo
Sent from my iPhone using Tapatalk
Kite and Vixen v11 look interesting too.
Iv got the vxr 2-7 firedot and it's great
Still 30mm tho
Far better than the vx3 with the vx5/6 eyebox
I've measured my bolt - eyebox clearances and also bbl - objective bell clearances . No way can I achieve lower mounting unless I go 30-32 mm objective diameter. However, the eyebox clearances are not a problem and I could mount lower even with 45mm.
If you mount too low then your will see the end of your barrel/suppresser in your site picture which I find really annoying. Something to consider.