Printable View
Does anyone have a z3 3-9 or 3.5-10 that they can measure the diameter of the front lense housing.
My mate has brought a Sako vixen with mounts like the picture so need front housing of 39mm.https://uploads.tapatalk-cdn.com/202...0a3a368a40.jpg
Sent from my CPH2531 using Tapatalk
@25/08 IMP
My Z3 3-10 x 42 has an ocular housing outside diameter of 48 mm so probably too big for your friends rifle.
A Z3 in 3 - 9 x 36 might work if you can check measurements ?
Awesome thanks so if anyone has a 3x9 they could measure for me pleaseQuote:
Originally Posted by 30.06king
Sent from my CPH2531 using Tapatalk
Z3 3-9 39.57mm at the looking in end.
And 42mm at the looking out end.
Bugger need 39mm looking out endQuote:
Originally Posted by Tahr
Sent from my CPH2531 using Tapatalk
@25/08 IMPQuote:
Originally Posted by 25/08 IMP
Sorry, that measurement is for the objective lens housing. Getting mixex up !
Still too big though.
Leupold 2-7
Thanks Bruce too big dam it.Quote:
Originally Posted by Tahr
Sent from my CPH2531 using Tapatalk
1.56" (39.6mm) according to the Leupold website for a VX-Freedom 2-7x33.Quote:
Originally Posted by Forestry
I suggest looking for a 32mm objective option, then maybe using a strip of shim to bring the OD up to the ring size if necessary?
Mines 41.7mm at the looking out end cos I dropped it on a rock hahaQuote:
Originally Posted by Tahr
Bugger that would piss you off [emoji24]Quote:
Originally Posted by Ryan_Songhurst
Sent from my CPH2531 using Tapatalk
Damn ! Hope you didn't hurt the rock !Quote:
Originally Posted by Ryan_Songhurst
You need the older Zeiss conquest 2.5-8x32.
There's a thought [emoji848]Quote:
Originally Posted by nor-west
Sent from my CPH2531 using Tapatalk
