I might be tempted to make an ugly modification. Think I'll drop in a new radiator after flushing the entire cooling system a couple of times as they're only a couple of hundred fro a good one.
http://www.classiccarsandtools.com/2...-installation/
Printable View
I might be tempted to make an ugly modification. Think I'll drop in a new radiator after flushing the entire cooling system a couple of times as they're only a couple of hundred fro a good one.
http://www.classiccarsandtools.com/2...-installation/
I would be wary of cutting those supports and any implications it may have onQuote:
Originally Posted by gadgetman
A Airbag deployment
B getting a warrant of fitness.
Not saying dont do it, just do your homework first.
Grab a new thermostat too Brian...
Done. Picked off TM for $7 delivered.Quote:
Originally Posted by mudgripz
Does it have airbags? (Haven't taken the Mrs for a spin yet)Quote:
Originally Posted by veitnamcam
Would probably be the strongest part of the area done how I would do it.
That is usually the problem, as I said do your homework before cutting.....it can get real complicated certing a repair on something that never should have been cut in NZ especially with some of the low volume cert guys who have no practical knowledge only a folder of shit.Quote:
Originally Posted by gadgetman
I'll try the job without cutting first. I've got a reasonable engineering background and could easily do it so they wouldn't even know it had been done.Quote:
Originally Posted by veitnamcam
Im reminded of a Meme that had Santa on it and reference to welds and a grinder!:DQuote:
Originally Posted by gadgetman
A grinder would be involved, but no welder. And I don't have the padding round the middle to go with a Santa outfit. ;)Quote:
Originally Posted by veitnamcam
when it comes to new tyres time, can recommend destination ATs on them, only ever got my hairdresser stuck once in a bog out back of oreti beach. went everywhere in central otago, including upto macetown with ease. 2 door Ravs are rather scarily solid.