Thread: inflatable PVC Glues options

I have a Southern Pacific 2.6M inflatable dinghy in need of repairs. I have partially completed it. the pontoons are glued on but the Transom remains.

I used Bostik 999R and Desmodur cross linker which seems to have worked a charm.

Issue I had was the air valves were leaking and sadly the transom repair I did didn't exactly set properly.

The 999R and cross linker is quite expensive. Around 200 bucks and the smallest size is 1L. I won't need that much as it is just the transom section left and if you add the cross linker to the glue it sets and is no longer usable after a little while.

I have noticed Burnsco has smaller pots of marine glue available.

https://www.burnsco.co.nz/ados-marine-glue-500ml

Has anyone used it before? Depending on how the dinghy rides it may get an 6-8hp on it.

Will bite the bullet if need be

cheers