@veitnamcam, spindle is fooked. As my mate said, snapped like a carrot. Be real nice to have some axle stands @Savage1
Attachment 27998
Printable View
@veitnamcam, spindle is fooked. As my mate said, snapped like a carrot. Be real nice to have some axle stands @Savage1
Attachment 27998
Bugger! Probably find better aftermarket ones cheaper than genuine, As mentioned factory bearing fits are on the loose side.
Jeez Nibblet you must have been flogging that hard to do that.
@Nibblet I've 2x axle stands you can use if Savage is too far away.
Yeah new spindle about $160 and new CV $60. Will pull the rest of the hub apart and clean it all up at work tonight to see whats salvageable. Will probably have to buy one of those 54mm sockets though, my set only goes to 36mm
Won't say yes, won't so no.
Lets just say if your not airborne your not giving it enough :ORLY:
Should be alright thanks dude. Got a couple of bottle jacks and some tyres sitting under the truck so should be fine.
That's good prices! don't skimp on the cv tho,the factory ones are actually very good,there is also one made Austrailia that is stronger than stock forget the name at the moment.
Just use a hammer and punch don't need a socket.
Get a price for terrain tamer bits, better than toyota. Is Bus and Truck still out the airport way, they used to sell and import the stuff.
I end up fixing so called professionals work after they have used all the proper high end professional tools incorrectly and broken a hardened stud off then un successfully drilled a off center by miles hole with a snapon drill bit that cost four times as much as one that is actually good then they hammer in a brand name screw extractor and snap it in the off center hole with a snapon 18 inch cresent.
Then they are fucked so they bring it to me,And i tell them if you hadn't touched it it would have taken me 2 minutes to remove but now you have butchered it will be an hour or more.:)
Sent from my GT-S5360T using Tapatalk 2
Already all ordered and on the way. Hopefully be up and running again by next weekend.
https://fbcdn-sphotos-d-a.akamaihd.n...7e1f46088586cc
This Pajero came into my mates shop
Not mine thank fuck , Ive got a land cruiser :thumbsup: