Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator Alpine


User Tag List

+ Reply to Thread
Results 1 to 11 of 11
  1. #1
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468

    looking at a honda trx450

    looking to buy a honda trx 450 from the neighbor first anything to know about these like what problems they can have ? there's two bikes ones got 37,000km other 40,000 the 37,000 bike is seem fine bar it has a horrid rattle from the engine almost sounds like big end bearings going or something major so wont touch this one don't think? but the other bike 40,000 engine wise is fine but it needs brake work no brakes work on the rear or the front also there's a rod that runs down by were your feet are through the engine i think and the bushes are stuffed in it and it slides around abit the other 37,000 bike already had this fixed as it seems like a common problem. but other than that seems needs brake work and this bush replaced its around 2000 to maybe 2004 looks like this one Honda TRX450 2004 | Trade Me so basically anything to be aware of ?

  2. #2
    Member crzyman's Avatar
    Join Date
    Dec 2011
    Location
    Alexandra
    Posts
    1,149
    Good model, just look at wheel bearings, brakes, diff bearing and seals, cracks in the frame. Check for oil leaks, electics all work etc. They were one of the best models made before they went to electric shift and cocked it all up
    If its guns, tits or tyres it's going to cost you lots of money

  3. #3
    Member Rich007's Avatar
    Join Date
    Feb 2012
    Location
    Levin, Horowhenua
    Posts
    1,002
    Quote Originally Posted by crzyman View Post
    Good model, just look at wheel bearings, brakes, diff bearing and seals, cracks in the frame. Check for oil leaks, electics all work etc. They were one of the best models made before they went to electric shift and cocked it all up
    The old ones were a lot better than the new ones. 40000km is getting up there. I hope you are not paying too much for it.

  4. #4
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    looking at offering 1600 as it needs brake work, and bush replaced. do you think that is a fair price?

  5. #5
    Ķåîмåî Ćôũńŧřŷ Bushrash's Avatar
    Join Date
    Dec 2011
    Location
    TAURANGA B.O.P
    Posts
    415
    Just Make sure no engine noises when hot ,,,there cylinder liners can come loose and we do replace valve seats on the odd one too,,,generally have a tappet type sound
    DONT BE A FOOL INDENTIFY YOUR TARGET BEFORE YOU PULL

  6. #6
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    well this one was cold and rattling as hell the one i wont touch but the other seemed fine.

  7. #7
    Member geezejonesy's Avatar
    Join Date
    Dec 2011
    Location
    near stratford
    Posts
    1,407
    buy a can-am with a winch on it far better ground clearance Can-Am Outlander 500XT 2012 | Trade Me
    BURN BABY BURN
    Rule 1: Treat every firearm as loaded Rule 2: Always point firearms in a safe direction Rule 3: Load a firearm only when ready to fire Rule 4: Identify your target beyond all doubt Rule 5: Check your firing zone
    Rule 6: Store firearms and ammunition safely Rule 7: Avoid alcohol and drugs when handling firearms

  8. #8
    Impure Lead Flinger
    Join Date
    Dec 2011
    Location
    Greymouth
    Posts
    1,405
    What do u want it for? The hondas dont do river crossings to well, and are not the most comfortable to ride but are pribably the most reliable... Ive had The suzuki kingquads and are a much nicer ride on the rough and very good in the water.. Have a yamaha 660 grizzly now and thats just a machine with everything and real comfortable to ride.... Id place the trx I had before the kingquad well at the bottom of the list as an allround hunting/fishing bike.... Weather it just didnt appeal to me, I just did not enjoy riding the honda.....

    Adam

  9. #9
    Member
    Join Date
    Mar 2012
    Location
    wellington
    Posts
    468
    just general bike for round the lifestyle block harrowing the paddocks etc so will be towing harrows a trailer if needed i mean its not going to be as amazing as a grizzly etc as its not Independent rear etc but will do what i need at a fair price. had a look at prices for parts and there not to bad considering my old ltf250 parts seem bit dearer, also appreciate everyone's views thanks

  10. #10
    Impure Lead Flinger
    Join Date
    Dec 2011
    Location
    Greymouth
    Posts
    1,405
    Obviously it should more than suffice for which you ask of it, definitly a good lifestyle block/farm bike.. They are a popular bike for a reason .....

  11. #11
    Member rambo rem700's Avatar
    Join Date
    Mar 2012
    Location
    palmy north
    Posts
    568
    Im a mechanic at a honda bike shop, i rate the 450s highly, as someone said the sleeves can cum loose and maybe a valve seat not that often in the model, things to look for, is it a 2wd/4wd model? if so make sure it works as it can fail, also the front driveshaft coulpling strips out and and those kms if not been serviced correctly the center shaft through the motor could be on its way. Check swingarm bearings etc, brake are easy as to fix anyway, i think $1600 is a good buy for a tough workhorse bike, not as comfy as a suzuki but last 3x as long, my 2 cents anyway, .

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!