Could you do a 6m model? :)
Printable View
Could you do a 6m model? :)
I was going to bend up a flat on edge and tack it bow and stern and a few props inbetween for something to lay a pattern against and cut/trim/cut/trim etc till I have a hull shape/pattern I am happy with then into the Alloy sheet.
It will be variable dead rise as with the reverse chine it is effectively a flat hull at the stern, how much it will vari will be look and see at the time as doing a variable naturally has the bow higher on the plane due to the diverging lines of the keel and chine and I donot want the bow to ride so high as to limit visibility.
No MIG? and whats with all the helmets above the folder? You're all giants down there?
Il mig the hull to the pontoons if I can get the 1mm wire program to work on the pulse mig,I wanted to tig the pontoons because I can guarentee gas tight without testing and they are a bit thin to mig and end up with a nice result.
They are some of my dead helmets...I started saving them up a while back.
Since it's your first boat build and as long as you finish it, you could keep the name simple so you can remember it "VEITNAMCAN"
Mecon Delta! Don't see any machine gun mounts yet:P still its early days in the design process ah. :redbullsmiley:
Looking good VC.
Bars Open
VC I am interested to know if you plan to fill the cavities with polystyrene?
Not much visual progress today...had a sleep in then went and set net and got more than quota of nice fat flounder....released excess of course.
Got her straight and welded out the last miters and worked out my keel line.Patterning tomorrow.
https://uploads.tapatalk-cdn.com/201...b809601697.jpg
Sent from my SM-G800Y using Tapatalk