Thread: Best chainsaw.

0-60cc

60+cc

Commercial and recreational groups.

Rather than a Ford Holden pissing match constructively post pros and cons of your favorite saw

Some men just want to watch the world burn

Well I love my Husky

Hey Stihl saws are the way to go. That's wot I use.

Got 2 both Husky. 53 and 62 cc. My chainsaw man wants to buy back my 53 as he says its one of the best ever he has come across. Real difference in your chain performance i.e. chisel or semi chisel. Helps if you properly sharpen. Some make a real dogs breakfast out of this important task. Best example is the skid site with people getting their load of wood for the winter. Some very angry people gloating as you slay the logs with ease. LOL.

Can't find a box to tick for my "echo "

Originally Posted by Munsey

Can't find a box to tick for my "echo "

That's because its not a real chainsaw

Originally Posted by TeRei

Got 2 both Husky. 53 and 62 cc. My chainsaw man wants to buy back my 53 as he says its one of the best ever he has come across. Real difference in your chain performance i.e. chisel or semi chisel. Helps if you properly sharpen. Some make a real dogs breakfast out of this important task. Best example is the skid site with people getting their load of wood for the winter. Some very angry people gloating as you slay the logs with ease. LOL.

everybody has a domanint side when sharpening, see it all the time
i would go big cc with a full chisel

at least you put up good brands not mitre 5 shit

Originally Posted by jack

That's because its not a real chainsaw

Jack I challenge you to try and kill it , honestly I've tryed and still goes hard . Poor thing it's been thrashed for 25 yrs I've owned it and it was old when I got it .

I tend two use huskys for some reason really don't give a shit about the brand, had 3 huskys, one had a fight with the bulldozer and lost, when I replaced it Stihl was cheaper package so got that.
They all take the absuse I give them
Husky 55 would be my fav
Husky 25 or 30 fencing saw
Sithl 066 magnum



Sent from my iPhone using Tapatalk

BRADS, you need a 395 mate....

Not sure why this is even a poll. EVERYBODY knows Husky saws are better

Got a 36 and 365 at home, and use 357 and 395 at one of my jobs

Originally Posted by Munsey

Jack I challenge you to try and kill it , honestly I've tryed and still goes hard . Poor thing it's been thrashed for 25 yrs I've owned it and it was old when I got it .

No problem I can do anything easy fixed I will can run it over problem solved

Originally Posted by ebf

BRADS, you need a 395 mate....

Not sure why this is even a poll. EVERYBODY knows Husky saws are better

Got a 36 and 365 at home, and use 357 and 395 at one of my jobs

Had a 395xp mate that had a fight with the Komatsu and lost

You really only need to go semi chisel if theres mud on the logs... or you hit the ground lots. Full is guna give you way better performance, point your file about 10 degrees up and try to keep the bottom of the hook flush with the chain and you'll be racing

Ive got 2 Stihls, my old mans little one its probably about 30-40cc and my 660, they literally just go and go an go, you pick them up after months of no use, chuck some fresh gas in give it a rip and they raw into life every time. Unbeatable reliability and performance, in my mind there is no serious competition. None of the Husky's Ive ever seen even have a patch on my saw's they just simply are not in the same class.

And just a side note why does every body who owns and raves about Husky's have two in the same size range? I can understand a big saw and little saw but the only real reason you would have two in the same range is you just cant trust them not to drop their arse in the middle of the job

Originally Posted by ebf

BRADS, you need a boat anchor mate....

Not sure why this is even a poll. EVERYBODY knows Husky saws are boat anchors

Got a 36 and 365 at home, and use 357 and 395 at one of my jobs (I only use them coz they pay me to)

Fixed it for ya