What are people using that's days? Recommendations?
Printable View
What are people using that's days? Recommendations?
Snoseal.
I just picked up some hanwag stuff the other day. It smells like it's mainly beeswax. But it completely rejuvenated my boots (hadn't waxed them for a few trips). They stayed well and truely waterproof for the weekends trip. I've tried meindl wax (its ok) and gregor chemie? from ezidirect (wasn't a fan).
I ran out of my usual Skellerup product a while ago, so thought I would try something different that was handy. Lanox nx4 grease.
A liberal coating applied with an old toothbrush put boots in the sun or in front of the fire to get the grease into the fabric, and hey presto. They stay waterproof and looking good for several trips.
Yeah, I use sno seal as well.
I heat the leather with a hot air gun first to open up the pores, which helps to absorb wax deeper into the leather.
Gortex boots? Wax may not be the best bet. Or so the manufacturers reckon.
Mine are an older pair of Meindles that owe me $00, so kind of sacrificial. I do have back ups though.Quote:
Originally Posted by kiwijames
Snoseal
Another one for Snoseal here. Does a great job.
Snoseal
Sent from my iPhone using Tapatalk
snoseal is great, but the factory stuff from paraflex is bloody awesome !!!
Sno seal fucked a pair of my gore tex boots, walk through wet long grass and got wet feet. Brought new pair and only use meindl wax now, had no trouble with it.
But for non breathable material boots sno seal is good.
Leather is breathable isn't it.?
I have no illusions about that stuff keeping your feet dry I'm more after it to keep the leather from drying out. Yes they are goreTex lined.
Lenox nx4 is the ducks nuts.on leather.
See a few guy's heating boots in front of fire and with heatguns here...if your boot has a pu midsole or pu sole unit you are reducing greatly the life of your boot....most manufacturers state not to heat your boots in this way and generally speaking heat from the sun should be sufficient. I have a pair of hanwag triglavs and the manufacturer recommends of course their own hanwax..having used several products and owned several different brands over the years, I would rate this wax over most others and equal to the rest....have used snoseal too and don't like it but that's my opinion.....check out what the manufacturer recommends and use that but don't over heat the leather or sole unit on your boot you will dry out and damage the leather and begin a process of breakdown in pu soles which most boot brands have..leather loves conditioning so I would recommend waxing regularly and especially around where the leather meets sole and around the tongue...cheers
Huberds is good stuff for leather boots. Easy to apply & sold at H&F.
https://huberds.com/product/huberds-...ase-quart-can/
Hmmm looks like I might have to find some snoseal been honking mine needed a bit of TLC, been using kiwi Dubbin and it just doesn't cut it
Ive used snoseal for a couple of years and have had the rubber randing start to peel off a couple of pairs. Lately found out that beeswax ie snoseal eats the glue ?
Brought some of this today to give it a hoon. Will see how it goes, certainly smells like it would repel most things including water...Quote:
Originally Posted by Ricochet
The local cobbler here in Palmy reckons the waxes etc affect the glue and bonding between sole and leather of the boot, which ultimately leads to separation and boot failure. He reckons just use good old nugget to keep the leather conditioned and reduce the negative impacts on the glue.
Huberd's is bloody good. A hairdryer on low to heat the boot works pretty well with that stuff. granger's beeswax isn't too bad either.