Printable View
So I picked up a cast iron single ring LPG burner for doing a cook up whilst out camping. It allows me to use a wok and do a big fry up
It came with a simple valve, (fixed air inlet) but seems to be ultra sensitive to gas pressure, and any gust of wind blows out the flames
Any suggestions?
Has it got like a wedge cut out on underneath for the air to
Mix with gas?
Wind shield?
Yes has wedge cut out beneath. No means of adjusting mix except by gas flow/pressure
Yes I set up a simple wind shield
Good clean blue flame, but ‘soft’.
Trying to figure out if I can tune it to run a more ‘robust’ flame.
Rite it’s the same as I run in my smoker,
So what you need to find , now don’t take the piss it took me ages of trail and error to figure this out
You find a rock that looks like a lemon wedge and sit it in the air vent , you don’t want to fully block it but close it up - move it round to find the sweet spot and bingo ya got a usable gas cooker
Or you could get techo and make some to do the same thing
Nodding. Makes sense. Thanks. I’ll try
I’m acknowledging that this is what you get for $45 ex mitre10 lol
Yep mine was on or off and as you found out bit of wind and it’s out
My trick gave me adjustment of heat and handles wind without a wind brake
I’m running it off a 4.5kg bottle. No reg. Standard companion type bottle fitting
Fitting an adjustable regulator was an option I’d wondered about - I didn’t want to overspend on this cheapie, if there’s actually a better brand/model available
Put a hose clamp round air vent move back and forth to change flame colour orange to rich -bluey white perfect and your bottle will last longer maybe try new reg they only 40 bucks . Have had them rust out and clog in the past .
There be problem most of those cast iron jobbies are low pressure so need a regulator bbq type is ok. Then refer to my other post .
It’s all making sense....
If you want a goody look around for one of the rinai twin burner with grill units that came in the 70/80s era caravans , just put a windshiel round it and you will have a primo unit you can cook crays real fast if you use both burners and make toast in the grill . you can normally oick them for 100 on turd mo .
Sib,
Make a simple wind break up using 3 pieces of ply wood to go around the back and 2 sides. Use 2 hinges to join them up. Make the pieces come about 7.5 cm above the height of the stove top and big enough to fit your frypan or camp oven etc. When using the stove orientate the back into the wind. It will then go great. Good stoves for cooking and simmer well.
You managed to get a non regulated bottle to fire up a regulated needed ring without a fire ball, you have done well...why we all piss around with gas I don't know...it took me a bit of trial and error to get my 3 ring to run off a forklift gas bottle.
When I bought it, it came with an integrated reg/9kg bottle (CC? - not POL which is my go-to). I asked the gas fitter (yes!!!!) to change the fitting to Companion type. They dropped the reg too and insisted it wasn’t needed.
Not surprisingly it blows itself out if I open bottle valve fully
My opening this discussion here illustrates my doubts over its safety and proper burning.
Am thinking at the moment;
Fit adjustable regulator
Conjure up an air/mix baffle using hose clip or suchlike
Build a dedicated wind guard
The classic folding lid two-burner camp cooker just didn’t have the heat I wanted to run a wok or large frypan, hence looking at a bigger burner
Why do you feel it must have adjustable regulator, I thought those single rings (and others) were used with a fixed set regulatorQuote:
Originally Posted by SiB
Mine is like a flame thrower if I try that...and I did...just the onceQuote:
Originally Posted by mimms2
The tap/valve on mine is a p.o.s.
It leaks at the tap if loose (audible gas and spectacular flame!), and when I tighten the bottom nut, at the point where it stops leaking, the tap itself won’t twist open/closed
I think I got a Friday afternoon job. I can’t return it as I had the hose altered per previous so I can run off Companion fitting.
Sigh. Nothings simple!