Thread: Recon this will work?

Originally Posted by mucko

looks mint mate worst case you may need to up grade to a proper wind sail to get enough wind power.

Ideas on how to integrate this into this design? thought of making basically a picture frame the same size of light wood and stapling some plastic sheet to it but didnt have any light wood so went with the ply option.

Originally Posted by veitnamcam

Ideas on how to integrate this into this design? thought of making basically a picture frame the same size of light wood and stapling some plastic sheet to it but didnt have any light wood so went with the ply option.

Square sheet 3/4"pvc pipe to spreed sheet roll the sheet over pipe and sew. drill hole in end of pipe at bottom of sail tie to back on a slight angle so it pulls one bottom corner or the other, thats so you can trim sail into the wind direction. a hinged mast to fix top sail span to, with guy string going forward to each pontoon and one string mid mast going back to the loop that holds the lolly. will try and get around to mums and get a picture of my old one.