On one of my visits to a deerstalkers range I noticed big ball bearings lying around
Huh?
canonballs the fella reckoned.
Canons?
that sounds like great fun
so who knows whats the deal?
Thinking I need a canon now,too
Printable View
On one of my visits to a deerstalkers range I noticed big ball bearings lying around
Huh?
canonballs the fella reckoned.
Canons?
that sounds like great fun
so who knows whats the deal?
Thinking I need a canon now,too
I have a black powder Canon.....
Attachment 160988
Pocket sized ....
Attachment 160989
But don't let that fool you.
Shoots 1/4 inch bearings and blasts a 3 foot long fireball out the barrel in the dark... great fun.
mates got a couple.I think one is made out of a section of bofors barrel golf balls fir nicely in it and they go for miles. the other one is a very short morter type thing that shoots coke cans filled with cement a very long way as well..have a look on yt at cannon 001 cannon 005 and cannon 009 and thats one of them i put up
In the hayday of Blackpowder shooting the big shoot at Wanganui used to open with a canon shoot, maybe 10 of them. All scaled versions but still quite terrifying. They used to register a good solid thump through the ground if you were nearby. I never knew where the safest place to stand was.
The other biggie shoot used to be at Whangarei. One of the guys there had a half size replica of a Coehorn mortar. He fired tin cans out of it with explosive charges. Those Whangarei guys were mostly crazy,
Bofors barrel canons were quite common.
This may well belong to someone on here? Absolutely immaculate machining and woodwork. 1/4 scale American civil war Whitworth cannon if memory serves me right.
Half a Bofors barrel.
Came to my farm for a shoot some years ago.
Ka bloody boom:P
Used the front end loader and metal detector to attempt to find the projos in the backstop. 10 foot in and no luck!!!
Attachment 160998Attachment 160999
Excellent thread so far :)
Beginning of last year there was a guy at the range with a small cannon. I was standing way back when I recorded this (did not trust that the thing might explode). Was really beautifully made.
https://youtu.be/1IlwgrS7F-4
Sent from my iPhone using Tapatalk
I made a small naval cannon (1/4" bore) at high school and shot a hole completely through 3 walls and a door in our outside toilet and wash house. The olds thought it was a great lark until they saw the damage!
But the .25 is for girls... (<:
Seeing such damage helps teach to always point firearms in a safe direction. People just don't realise the energy in some firearms when they shoot into a back stop. Or they may shoot an animal and not appreciate how much energy the projectile retains on exit.
Back to model cannons and their no-FAL status. I have a repro medieval hand-cannon on a pole (aka "handgonne"). Takes .577 Minies. Just a fuse hole, not even a trigger like on an arquebus. Do I need to lock it up or could I hang it above my fireplace?
if its black and looks tactical you may have to hand it in
Greetings All,
I have seen a cannon with a 1 inch bore. This works out roughly to 4 bore when talking of shotguns and smooth bore or early rifled guns shooting round balls weighing about 4 ounces. Samuel Baker had a double he used on elephants, he had a 2 bore as well I believe.
Took a stupendous charge of black powder and the recoil must have been stupendous as well. Would have made a 460 Weatherby look like a .22 RF.
Regards Grandpamac.
I should have mentioned that it was a proof load, the projectile was 1" of 1/4" Whit bolt wrapped in a a layer of toilet paper and the full Ballistite charges from 2x .303 blanks. Instead of running back on its little wheels, it just went end over end until it slammed into the workshop wall!