Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

DPT Darkness


User Tag List

+ Reply to Thread
Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 32
Like Tree21Likes

Thread: Is it 'Cold Bore' or 'Foul Bore' ?

  1. #16
    DAF
    DAF is offline
    Administrator DAF's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    1,037
    I found how I clean depends on the barrel,
    My kreigers I find I clean till spotless (Carbon and Copper) and it take 1 to 2 shots to come right
    but my TF when match shooting I just remove carbon and a little copper after every two matches( about 24 shots), if I remove all the copper it takes around 10 shots to come right, a bit a a balancing act with the TF
    "Such is life..." - Ned Kelly

  2. #17
    Member Dead is better's Avatar
    Join Date
    Jan 2012
    Location
    Auckland
    Posts
    976
    My rounds march up the page as the barrel warms up (about 5mm higher per shot at 200m). The first one is always a tiny bit left (pretty good i think as far as foulers can go). Once up to a working temp it pretty much holds a stable POI on the page as long as it doesnt cool right down. A lot of a rifles behaviour in this department depends on your breaking in method (or so i've been told by my betters). I was pedantic az with this one and it seems to have payed off. Everyone seems to be able to shoot well with it
    Micky Duck likes this.

  3. #18
    Member sneeze's Avatar
    Join Date
    Dec 2011
    Location
    nelson/marlborough
    Posts
    3,349
    Quote Originally Posted by DAF View Post
    I found how I clean depends on the barrel,
    My kreigers I find I clean till spotless (Carbon and Copper) and it take 1 to 2 shots to come right
    but my TF when match shooting I just remove carbon and a little copper after every two matches( about 24 shots), if I remove all the copper it takes around 10 shots to come right, a bit a a balancing act with the TF
    Could you define the difference between clean and comes right in terms of group size? For the bennifit of looking at it from a hunting vs comp accuracy point.
    "You'll never find a rainbow if you're looking down" Charlie Chaplin

  4. #19
    R93
    R93 is offline
    Member R93's Avatar
    Join Date
    Feb 2012
    Location
    Westland NZ
    Posts
    16,102
    Quote Originally Posted by el borracho View Post
    whats your decrease in speed with HB -must be slightly different even to moly
    Its not as slippery for want of a better word. I dont lose much at all as I use less powder to get the same speeds as moly.

  5. #20
    DAF
    DAF is offline
    Administrator DAF's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    1,037
    Quote Originally Posted by sneeze View Post
    Could you define the difference between clean and comes right in terms of group size? For the bennifit of looking at it from a hunting vs comp accuracy point.
    My 308 FTR Rifle after I have cleaned to remove all carbon / copper the first shot is low and the second wont group also if I were to include in the group it would be about a 2 inch group at 100, but after that it always groups nicely mostly around 1/4 inch, my SAUM is the same where it needs from totally clean, a fouler shot before it groups nice.
    My F-Class Rifle with a TF barrel, if you clean everything, it takes around 9-12 shots before I will give a consistent tight group
    "Such is life..." - Ned Kelly

  6. #21
    Member sneeze's Avatar
    Join Date
    Dec 2011
    Location
    nelson/marlborough
    Posts
    3,349
    Cheers it was the measurement I was looking for ,its often stated as a difference but rarely defined in terms of group size. 2 inches is considerable. Im guessing there is some wiggle room in peoples definition of clean here. Have you tried anything in the bore to bring the frist shot back into the group or not bothered?
    "You'll never find a rainbow if you're looking down" Charlie Chaplin

  7. #22
    DAF
    DAF is offline
    Administrator DAF's Avatar
    Join Date
    Dec 2011
    Location
    Wellington
    Posts
    1,037
    for me I just learned the quirks of my barrels and live with it, I found when in competition knowing when clean and how much to clean is all part of the challenge
    "Such is life..." - Ned Kelly

  8. #23
    Member sneeze's Avatar
    Join Date
    Dec 2011
    Location
    nelson/marlborough
    Posts
    3,349
    Yes I thought that might be the case, little point trying to find something that is better when a couple of fouling shots will give the best. A little different from a hunting point where getting the first shot back closer to the group can be quite usefull, a patch of kroil follwed by a soft dry patch gives very aceptable results for me with the first shot being hard to pick from the rest. This is from a solvent and bronze brush clean not a JB or autosol scrub .It wont win any medals but it will put plenty of meat on the table.
    Micky Duck likes this.
    "You'll never find a rainbow if you're looking down" Charlie Chaplin

  9. #24
    Member Tikka7mm08's Avatar
    Join Date
    Mar 2012
    Location
    North Loburn
    Posts
    4,371
    Been thinking about this a little lately. Cleaning the barrel after every use is something I have taken seriously. I thought getting the barrel clean for load development meant more consistency, but when you do three or more loads without cleaning that is not really correct.

    I'm starting to think (hence old thread revive) perhaps leaving the barrel just with the swipe of oil/clean patch before using approach. This will be a mental challenge.
    Micky Duck and grandpamac like this.

  10. #25
    Member mopheadrob's Avatar
    Join Date
    Jun 2018
    Location
    Christchurch
    Posts
    591
    Yeah, me too. Took my bro-in-law @CamD for a hunt recently and got him set up on his first animal, a young stag at 315m TBR. His first shot was a clean miss, which could have been due to the situation and distance but he shoots bloody well at the range. Then I remembered I’d cleaned the copper after the last session with that rifle. Fortunately the stag didn’t know where the shot came from and stopped in a clearing, and Cam’s second shot was right on the money
    Tikka7mm08, Micky Duck and CamD like this.

  11. #26
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,367
    if rifle has had abuse on days hunting,it will get maybe 3-4 lightly oiled patched down bore,then put away after a good external whipedown with oily rag.... been using breakfree for years and dont do the clean pacth before use thing...
    about every two years or thereabouts get all fancy and do the whole copper solvent clean....then go back to lazy couple of patches after use...as dont range shoot,purely meat/varmit hunter pin point isnt criticle for me,dont shoot past 350 so again not criticle.
    have cleaning rods with spear jags across antlers in reloading room...takes but a minute to whip a couple of patches through bore,no matter how tired I am, and can then sleep, knowing bore isnt deteriating.
    the rifle that just died after 32years of this treatment put 3 shots into group under an inch before my cockup...so cleaning method cant be all bad.
    I cant see diference in poi between really clean/de copperfied and dirty.....
    Tikka7mm08 and Mooseman like this.

  12. #27
    Member
    Join Date
    Dec 2019
    Location
    Okawa Hawkes Bay
    Posts
    2,675
    Greetings All,
    Most people fall into somewhere between fastidious and lax on rifle cleaning after a few years. This is pretty much where I am. A patch with Hoppes no 9 followed by a nylon bristle brush and patches to clean with a little Hoppes left in the barrel and wiped out before the next use does it for me. From time to time they get much the same treatment with a copper solvent followed by Hoppes. My rifles don't seem to move much between and fouled but for me the first shot from a clean cold bore is what is important. Mimic the conditions you will have when hunting. I never put oil in the bore, too hard to get out. Some of the long rangers I know leave their bores uncleaned during the season.
    I find the idea of barrel break in amusing. 20 years ago if you asked someone how they broke in their hunting rifle barrels you would have got a blank look at best. Some think a complicated break in procedure is essential for decent accuracy. Others think it is a conspiracy by gunsmiths to get you to wear out your barrel faster or provide another excuse if your barrel does not meet your expectations. I am somewhere in the middle on this as well. A clean every few shots at first and making sure the barrel doesn't get too hot is about it for me.
    Regards Grandpamac.
    Tikka7mm08, Micky Duck and Mathias like this.

  13. #28
    Member fernleaf's Avatar
    Join Date
    Apr 2013
    Location
    Dunedin
    Posts
    223
    Quote Originally Posted by Tikka7mm08 View Post

    I'm starting to think (hence old thread revive) perhaps leaving the barrel just with the swipe of oil/clean patch before using approach. This will be a mental challenge.
    Yep, get rid of the carbon after each shooting sesh, but leave the copper. Once you notice your groups opening up (round count will be totally dependent on your rifle - might be as low as nine or as high as 125), then get rid of all the copper and start again.
    Tikka7mm08 likes this.
    In longrange riflery, trajectory is the pure science part. Gravity is a constant for our purposes.
    Wind is in the art department.
    Light is pure fucking voodoo.

  14. #29
    Member
    Join Date
    Dec 2011
    Location
    Southern Alps
    Posts
    4,004
    After a light clean,1st shot is about 25mm to the right,all the rest of the shots within 15mm of bull.A deer is a big target out to 300yds so only give the tika a clean every so often.Depends on dirt, dust and rain.
    Tikka7mm08 likes this.

  15. #30
    Member
    Join Date
    Jul 2020
    Location
    Central North Island
    Posts
    4,221
    For hunting purposes and with the advent of suppressors I always carry a couple of subsonic fmj loads, for possums around camp and to foul the bore prior to a long shot. Suppressor pushed into the leaf litter and mmmppf! you wouldn't here it going off from further than 5m away
    Tikka7mm08 and grandpamac like this.

 

 

Similar Threads

  1. bore cleaner
    By ANTSMAN in forum Firearms, Optics and Accessories
    Replies: 11
    Last Post: 25-07-2012, 09:27 AM
  2. bore, polishing?
    By ANTSMAN in forum Firearms, Optics and Accessories
    Replies: 25
    Last Post: 20-07-2012, 08:09 AM
  3. V0 for cold and warm ammuntion
    By Norway in forum Reloading and Ballistics
    Replies: 6
    Last Post: 23-05-2012, 12:22 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!