Thread: Factory ammo fliers every 3 shots

I have a Brno 243 that has a similar contact point between barrel and fore end, and off centre too. I have sanded the barrel channel so that the contact point is more centred. The rifle shoots okay but I'm sure it can do better. It has pillars between the action and bottom metal, but the pillars are loose and not fixed in the stock. I bought an Acriglass kit and plan to have a go at bedding the action (probably only at front and rear), then sanding out the contact point to float the barrel. I have the same rifle in 308 in a fibreglass stock and it shoots very well, so I'm hoping the 243 will be just as good, as long as I don't stuff up the bedding job!