Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Results 1 to 8 of 8
  1. #1
    Member
    Join Date
    Jul 2015
    Location
    Central otago
    Posts
    87

    Handi rifle issue

    Was hoping someone could give me some advice

    I have a handi rifle in 223 with a dpt overbarrel on it. A few months back I zeroed it when I got the surrpressor fitted, I put 20-30 shots through it and the the point of impact changed to 8 inches to the right. So I corrected on paper and after another 30-40 shots it's done the same thing?
    Doesn't make me very confident chasing the sneaky wee fallow along the river

    Any thoughts?

  2. #2
    Bah, humbug ! Frogfeatures's Avatar
    Join Date
    Nov 2013
    Location
    Auckland, until I can escape south....to Southland.
    Posts
    1,639
    Same brand, and weight of ammo ?
    You haven't tightened the action bolts ?
    Shot off a bench ?
    Bit surprised the POI changed so much too.
    He nui to ngaromanga, he iti to putanga.

    You depart with mighty boasts, but you come back having done little.
    Sounds like a typical hunting trip !

  3. #3
    Member
    Join Date
    Dec 2011
    Location
    North Island
    Posts
    378
    I had an H and R Handi rifle in 223 a while back. Must say it was the most difficult rifle to develop a load for that I have ever had. It had a gunworks suppressor. I too had the drifting zero problem and would also split groups. 2-3 in one area and another 2 of to the right and high.

    Between your zeros, did you pull rifle apart? I found that if i applied different torque to foreend screw it was applying different pressure point on barrel. Fixed it by doing two things.

    One, I used a torque driver to ensure i did the screw up the same every time, and two, I made a thin washer and put it in the screw recess in the forend, essentially floating front portion of barrel. After that I stared to get consistent tight groups..

    Good lunk with yours they are a fun rifle to have.

  4. #4
    Member
    Join Date
    Jul 2015
    Location
    Central otago
    Posts
    87
    Quote Originally Posted by Robojaz View Post
    I had an H and R Handi rifle in 223 a while back. Must say it was the most difficult rifle to develop a load for that I have ever had. It had a gunworks suppressor. I too had the drifting zero problem and would also split groups. 2-3 in one area and another 2 of to the right and high.

    Between your zeros, did you pull rifle apart? I found that if i applied different torque to foreend screw it was applying different pressure point on barrel. Fixed it by doing two things.

    One, I used a torque driver to ensure i did the screw up the same every time, and two, I made a thin washer and put it in the screw recess in the forend, essentially floating front portion of barrel. After that I stared to get consistent tight groups..

    Good lunk with yours they are a fun rifle to have.
    That will be the issue. I'll have to use that idea
    Thanks for your help

  5. #5
    northdude
    Guest
    I was going to say the same as above good little rifles they don't like oil or grease any where around the latch or the shelf it closes on either use it dry

  6. #6
    Member Micky Duck's Avatar
    Join Date
    Apr 2015
    Location
    Geraldine
    Posts
    22,365
    also try leaving forend alone and shooting with offside hand back towards action so its not on the wood....not ideal but eliminates the forend pressure.

  7. #7
    Member Uplandstalker's Avatar
    Join Date
    Nov 2012
    Location
    Souith Canterbury
    Posts
    1,725
    Scope mounting...............

 

 

Similar Threads

  1. H & R handi rifle what are they like
    By 260rem in forum Firearms, Optics and Accessories
    Replies: 3
    Last Post: 08-05-2014, 11:29 PM
  2. H&R handi rifle question
    By Vapour in forum Firearms, Optics and Accessories
    Replies: 1
    Last Post: 28-04-2013, 10:56 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!