-
1 Attachment(s)
Attachment 24787
Ive been using this for a while now on my MOA Mk4. Just remember to back off x1 or x2 clicks depending if you are shooting on 10° or 15° angle. :o
Easily gets you out to 600 yards using the standard pressure/temp of your normal hunting spots. ;)
Mk4 turrets only have a small visable section so it's proberly one of the hardest scopes to do it with. :pissed off:
Photo Shop or AutoCAD are the best programs to use if you can find someone that knows how to use them. :O_O:
Print on normal printer then wrap with waterproof tape (that sticks like shit to a blanket) :D around it. Get this tape from Mitre10 Mega and cut it down to suit.
The red lines mark the origonal MOA so i can still easily use a drop chart if i need to and see if the tape has moved on the turret. :(
First test day saw x2 sika drop on the spot at 594 and 597 Yards. Shot another one at 450 Yards the other day so im convinced :thumbsup:
If you have very accurate data and good CONSISTENT realods you should not have any problem.
Good Luck :thumbsup: