How big is yours?

I will send a 5 " square of approx 20mm work hardened 400 to anyone who thinks they can punch a hole clean threw it.
Conditions:
200m min, I dont want to be responsible for any "come backs":ORLY:
Steel must be "hung" not pressed up against a bank or similar
Any pass threws must be validated by camera and or witnesses and posted on this forum with projectile and impact velocity.
Winner will probably receive:D What ever I deam indestructible:yaeh am not durnk: Dam it that should say I am drunk!

Were's Gavin? I know he'll have something to do the job.

Quote:

---

Originally Posted by veitnamcam

I will send a 5 " square of approx 20mm work hardened 400 to anyone who thinks they can punch a hole clean threw it.
Conditions:
200m min, I dont want to be responsible for any "come backs":ORLY:
Steel must be "hung" not pressed up against a bank or similar
Any pass threws must be validated by camera and or witnesses and posted on this forum with projectile and impact velocity.
Winner will probably receive:D What ever I deam indestructible:yaeh am not durnk: Dam it that should say I am drunk!

---

You don't have to look far to find something to do that & you didn't mention a minimum range or no ap...:D

Quote:

---

Originally Posted by veitnamcam

I will send a 5 " square of approx 20mm work hardened 400 to anyone who thinks they can punch a hole clean threw it.
Conditions:
200m min, I dont want to be responsible for any "come backs":ORLY:
Steel must be "hung" not pressed up against a bank or similar
Any pass threws must be validated by camera and or witnesses and posted on this forum with projectile and impact velocity.
Winner will probably receive:D What ever I deam indestructible:yaeh am not durnk: Dam it that should say I am drunk!

---

You must be bored :wtfsmilie:

Quote:

---

Originally Posted by Terminator

You must be bored :wtfsmilie:

---

Yip

Quote:

---

Originally Posted by Kiwi Greg

You don't have to look far to find something to do that & you didn't mention a minimum range or no ap...:D

---

Yea i did 200m! armor pearcing would be interesting. I just want to see some people punch a hole threw it:D

Quote:

---

Originally Posted by veitnamcam

Yea i did 200m! armor pearcing would be interesting. I just want to see some people punch a hole threw it:D

---

Yep so you did :) quickly read it as mm so thought you were talking about size :D

Thats a tall order :yaeh am not durnk:

Quote:

---

Originally Posted by Kiwi Greg

Yep so you did :) quickly read it as mm so thought you were talking about size :D

Thats a tall order :yaeh am not durnk:

---

So your saying yours is not big enough then?

Quote:

---

Originally Posted by veitnamcam

So your saying yours is not big enough then?

---

20mm hard @ 200 is a big ask with conventional pills @ 100 it might do it, maybe....

Id hate for one to come back and remove your earmuff:D or worse
I guess you could hang it on a bit of an angle to direct it down but would make it even harder to penitrate.
Was it 50BMG off the other forum that said he had some armor pearcing incinderary that would penitrate 50mm 500 and set fire to shit on the other side? that would be neat to watch.

Wildcats 6.5/.338 LM punched 16mm at 450m

Quote:

---

Originally Posted by striker

Wildcats 6.5/.338 LM punched 16mm at 450m

---

Sounds promising

OK if its to hard you can set it up so it cant swing and shoot from as close as you feel safe

Any takers?

Reakon my Mosin with FMJ might give it a nudge.

Mine's tiny. Not a hope. Fortunately nothing I shoot at is armour plated.

Quote:

---

Originally Posted by gimp

Mine's tiny. Not a hope. Fortunately nothing I shoot at is armour plated.

---

:D me too

Quote:

---

Originally Posted by Brennos

Reakon my Mosin with FMJ might give it a nudge.

---

Send postage details then:cool:

I thought Spanners might have put his hand up for this one, a thousand rounds of 223 fmj should work there way threw surely:D

I was surprised at how deeply the 168gr bergers drill into steel even around 400m