Because balance, tradition, people are stupid, legal requirements in some places (USA has to be over 16"), etc, etc.
The real world difference in terms of speed is nothing either way
Printable View
Because balance, tradition, people are stupid, legal requirements in some places (USA has to be over 16"), etc, etc.
The real world difference in terms of speed is nothing either way
Wear hearing protection
Can you use a grinder with cutting disc to cut a barrle or a hack saw? I just learnt my mates got a lathe so I can clean the end up on that. Probably be a while before I do anything so I still have time to research it up a bit better make sure I have good idea of what im doing.
Christ pay someone the $40 to do it
Paying someone to do it isnt learning how to do it myself
hacksaw + new blade, take it slow, less heat, look on utube for the larry potterfield / midway vid on re-crowning, you don't need a lathe unless you want a deep crown
piss-easy job to shorten and re-crown
Thanks. Ive seen some of his vids I will look for a cutting one.
Im larry potterfield fom midway usa, and thats the way it is. Goes somehing like that haha.
From crc in a green can? At school on the power axe not sure if its its name but its what we call it we use coolent water mix.
Nah I prefer to do it my self.
Cool. Keep us informed with pics etc.
Will do. It will be a while from now though.
Toby, pretty much any oil will help when cutting with a hacksaw (or drilling into metal). Engine oil, 3-in-1, whatever.
The less viscous, the better, but no need to go overboard.
You can even use plain water if you have nothing else.
Is choking the barrel on a rifle a very good idea? Wouldn't when you get really tight the rifling will be digging deep into the projectile making more friction then needed?
Toby, the common bore "choke" on a quality rimfire is 2.5 to 3 thou constriction linear from the chamber throat to the muzzle, not enough to damage the projectile but enough to maintain a good gas seal and consistent rpm for it's spin stabilized flight.
Have a wee read at this link Toby.
http://www.border-barrels.com/articles/bmart.htm
There is an elementary explanation of most of the top barrel makers techniques in an easy to read format.
Well worth turning into a sticky on a reloading/ ballistics page somewhere.
When I get back to work I'm going to print it off and keep it in the orchard workshop as I'm always forgetting who is using which cut process in their rifling manufacture.
Can't believe I just read something that long on xmas day haha, good reading though.
You will never regret reading that Toby, often on a reread you pick up info you missed first time around
I think I will forget it but its saved with about 60 other links to gun related stuff if I need it again
Testing at the range :D
Attachment 5553
Is it comfortable shooting off those benches?
oh and is it ok to clean up the cut on a lathe? or am I better to file it down?
If you are not sure on the final quality then cut off less than you really want, you can always cut it back further if you are happy. Also the bit you cut off can be used for practice. Gunworks often sell offcuts for people to practice with too.
You dont need to use a lathe to face and crown the end of the barrel, after hacksawing to correct length , get a decent combination square and file the end square then finish it off with some fine sandpaper for a bit of shine. Then use a brass screw with some valve lapping compound for the crown. Bit of bluing compound afterwards maybe. Can use CRC on your hacksaw blade there always seems to be a can around
sweet then, I have bluing stuff gotta get crc and lapping paste stuff, crc never last long with my brother and the old man wasting it on shitty engines, they need more guns in their life.
In reguards to the concern about CZ and losing the restricted/choked muzzle end and losing accuracy when you shorten .
Donot worry about it , as in reality , you will not notice any difference in accuarcy , in the UK about the most common mod done on the CZ rimfire rifles is to shorten barrel down to 12 inches for a silencer , and they have no accuracy problems doing it .
Later Chris