Welcome guest, is this your first visit? Create Account now to join.
  • Login:

Welcome to the NZ Hunting and Shooting Forums.

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed.

Terminator DPT


User Tag List

+ Reply to Thread
Page 1 of 6 123456 LastLast
Results 1 to 15 of 76
Like Tree44Likes

Thread: Little help needed

  1. #1
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595

    Little help needed

    Im having a bit of trouble with my new to me .308 when i first acquired it i was reloading it fine but after the 9th shot it started to be a bitch to pull the bolt back. Now its a pain in the arse and you have to haul on the bolt to slide it back. Ive got no idea so was hoping that someone on here would have a clue. Its a savage 110 Cheers
    If god didn't want us to eat animals he wouldn't have made them out of food.

  2. #2
    Member carlhurley's Avatar
    Join Date
    Jul 2012
    Location
    na
    Posts
    258
    are you using factory ammo

  3. #3
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    @carlhurley yea mate federal power shock 150gr soft point
    If god didn't want us to eat animals he wouldn't have made them out of food.

  4. #4
    Member carlhurley's Avatar
    Join Date
    Jul 2012
    Location
    na
    Posts
    258
    thought it might of been reloaded too much powder thats all i know

  5. #5
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    Quote Originally Posted by carlhurley View Post
    thought it might of been reloaded too much powder thats all i know
    Any chance my gun doesnt like the federal rounds?
    If god didn't want us to eat animals he wouldn't have made them out of food.

  6. #6
    Member
    Join Date
    Mar 2014
    Location
    Wairarapa
    Posts
    624
    I've had that problem with some handloads. I'd try some different ammo and see what happens.??

  7. #7
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    Quote Originally Posted by Monk View Post
    I've had that problem with some handloads. I'd try some different ammo and see what happens.??
    Fuck it. This time remington core lokt same deal
    If god didn't want us to eat animals he wouldn't have made them out of food.

  8. #8
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    @Barefoot any ideas mate?
    If god didn't want us to eat animals he wouldn't have made them out of food.

  9. #9
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,745
    get a good powder solvent and clean the hell out of the chamber and first part of the barrel.
    use a bronze brush. when you think it is clean as it will get soak in solvent then leave till tomorrow and start again.
    repeat for as many days as required until actually clean.
    When clean push a lube protectant like break free clp threw and a dry patch(just one)before shooting.
    will have built up carbon causing high pressure.

    Sent from my GT-S5360T using Tapatalk 2
    mikee likes this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

  10. #10
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    Quote Originally Posted by veitnamcam View Post
    get a good powder solvent and clean the hell out of the chamber and first part of the barrel.
    use a bronze brush. when you think it is clean as it will get soak in solvent then leave till tomorrow and start again.
    repeat for as many days as required until actually clean.
    When clean push a lube protectant like break free clp threw and a dry patch(just one)before shooting.
    will have built up carbon causing high pressure.

    Sent from my GT-S5360T using Tapatalk 2
    Ok cheers vc will jump on the interweb and see what i can do
    If god didn't want us to eat animals he wouldn't have made them out of food.

  11. #11
    Village Idjit Barefoot's Avatar
    Join Date
    Dec 2011
    Location
    Bunji's Bach
    Posts
    3,896
    perhaps strip and clean bolt then a light spray of oil may be in order as well?
    @JayColli did you ever have a similar issue with it when you had it? It hasn't been fired since I got it off you.
    The Biggest Room is the Room for Improvement

  12. #12
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    Quote Originally Posted by Barefoot View Post
    perhaps strip and clean bolt then a light spray of oil may be in order as well?
    @JayColli did you ever have a similar issue with it when you had it? It hasn't been fired since I got it off you.
    Cleaned an oiled. Might be what vc said
    If god didn't want us to eat animals he wouldn't have made them out of food.

  13. #13
    Member possummatti's Avatar
    Join Date
    Jul 2014
    Location
    morrinsville
    Posts
    595
    Quote Originally Posted by veitnamcam View Post
    get a good powder solvent and clean the hell out of the chamber and first part of the barrel.
    use a bronze brush. when you think it is clean as it will get soak in solvent then leave till tomorrow and start again.
    repeat for as many days as required until actually clean.
    When clean push a lube protectant like break free clp threw and a dry patch(just one)before shooting.
    will have built up carbon causing high pressure.

    Sent from my GT-S5360T using Tapatalk 2
    Hey vc
    Would u have any idea where to get the brush and solvent. I dont need heeps and i dont wanna spent $100 on stuff if i can avoid it. Cheers
    If god didn't want us to eat animals he wouldn't have made them out of food.

  14. #14
    Member
    Join Date
    Apr 2012
    Location
    canterbury
    Posts
    1,621
    When my 110 played up I cleaned the chamber with a 12g brush
    Worked a Treat
    possummatti likes this.

  15. #15
    Almost literate. veitnamcam's Avatar
    Join Date
    Dec 2011
    Location
    Nelson
    Posts
    24,745
    Quote Originally Posted by possummatti View Post
    Hey vc
    Would u have any idea where to get the brush and solvent. I dont need heeps and i dont wanna spent $100 on stuff if i can avoid it. Cheers
    Other than a sports shop not really. try reloaders supplies they are fairly popular?


    Sent from my GT-S5360T using Tapatalk 2
    mikee and steven like this.
    "Hunting and fishing" fucking over licenced firearms owners since ages ago.

    308Win One chambering to rule them all.

 

 

Similar Threads

  1. Help needed
    By boomstick in forum Hunting
    Replies: 21
    Last Post: 26-01-2015, 01:50 PM
  2. advise needed
    By rookiesniper in forum Hunting
    Replies: 4
    Last Post: 06-10-2013, 01:16 PM
  3. help needed
    By wile in forum Hunting
    Replies: 1
    Last Post: 30-07-2013, 08:03 AM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Welcome to NZ Hunting and Shooting Forums! We see you're new here, or arn't logged in. Create an account, and Login for full access including our FREE BUY and SELL section Register NOW!!