-
CZ 512 Magnum
Hi All I have just purchased a CZ 512 22 magnum rifle. I am using winchester ammo HP and am having trouble when suppressor is fitted rifle wont cycle properly and am getting constant miss fires. if I remove suppressor rifle cycles fine. Any ideas? the rifle has only had 200rnds through it and is well cleaned and lubed.
Cheers
-
It’ll be dirty.
They click like that when full of spent powder. I’ll bet you’re using the 32gr (or close to that) it’s very dirty powder
Drop the trigger assembly out and you’ll be amazed
Same w the suppressor. Take it off and give it a blow out
I’ve had to go back up to the Winchester 42gr ammo - different powder cleaner burning!
-
Look around the bolt head re misfires.
That was my experience w same rifle anyway....
-
Cheers will give another clean...When it misfires there is little or no mark from firing pin? am using 40g ammo at the moment.
-
Hi @john c welcome to the forum. Head on over to the "Introduce yourself " thread and say gidday.:)