I've been digging around a fair bit on google and this site, but a few things may require starting specific threads, but in the interim I'll put some of the questions here. Apologies in advance, learning new firearms laws is never fun for anyone.
For some background, it appears that both of our laws are built on similar concepts, but with radically different implementation. I see a wide variety of information on the police websites that mix laws with what
"should" be done, so I'm trying to define what is an actual law and what is considered a best practice.
Based on what I understand of the laws, I would be looking to import a mix of A and E category firearms. I understand that I must apply for and be granted the relevant licences in advance of import. I am hoping to complete all my applications and certification in advance, since I would ideally like to move all my stuff at the same time as I move, to avoid a return flight to Canada to send a second shipment.
1) Does anyone know if the police will grant A and E category licenses to someone abroad? I am able to demonstrate possession of of equivalent licenses to the A, B and E category licenses, have a valid range membership, and can bring secure storage containers with me that would meet police standards (to be established later in this post).
1A) I'm assuming that I must take some sort of safety course in NZ - are they taught by private contractors or government? Is there a "best" course available around Christchurch?
1B) I see that the C endorsement allows the possession of certain firearms for the purpose of collection, but that they can't be fired with live ammunition... if a firearm is purchased under a C category, can it then be transferred to a different category to be shot, if you possess the relevant category license?
2)How do the magazine laws work in NZ? I see references to 7 round capacity in centerfire magazines, but also appearances of holding more than 10 rounds. I
think I understand that both capacity and appearance influence category of firearm, in that a magazine that either holds more than 7 rounds or appears to hold more than 10 will make said firearm an E category firearm? So in this case, a bolt action rifle with an 8 round magazine, or magazine that appears to hold 11 rounds would be considered an E category firearm?
2A) In E category firearms, are normal (IE unlimited capacity) magazines permitted, or are they somehow limited to capacity as well? If so, what is the maximum rounds permitted, and may they appear longer than that?
In Canada the rough rule is that semi-automatics may only hold 5 centerfire rounds, whereas bolt/pump/rimfire long guns are unlimited. Pistols may have 10 round magazines. Appearances don't factor into the law, hence the confusion.
3) To define E category firearms, if a firearm has ANY of the defining features, does it become E Category, or is it a combination system like in the US? IE, does the addition of a single listed feature, like a bayonet lug to a bolt action rifle make it an E Category Firearm?
3A) How does this affect things like Lee Enfields, that possess 10 round magazines and bayonet lugs, but are not by any means assault rifles?
3B) Does anyone see any barriers to bringing what are considered E category firearms into the country? I see references to handing in E category guns when importing others... but since I'm moving there that doesn't make a ton of sense.
4) Which categories are subject to transfer control, registration and max ownership? I've seen that pistols must be transferred, registered, and that you may possess a maximum of 12. Is this the case with A and E categories?
5) Does removal of features (IE cutting off a bayonet lug, removing the pistol grip to solid stock and putting in a 5 round magazine) change the category of a firearm from E to A?
6) Can A-category firearms be legally changed to E category firearms by adding the defined features (such as a bayonet lug, pistol grip, or normal capacity magazine). Will the police allow this? Are there barriers to doing so if you are already a licensed E category owner?
Thanks! Hadn't seen that somehow.
I'll be there for a while, so plan is to get properly permitted then bring or build a safe there. I'm still feeling out the regulations on what I would need to do. I think I understand storage regulations based on this (
https://www.police.qld.gov.au/progra...rage/howto.htm )
From this I have a few questions.
7) In practice, do the police allow private individuals to build their own locking cabinets, provided the regulations are followed (IE 6mm+ plate thickness, two locking devices, deadbolt diameter etc)?
8) For E Category firearms, are steel cabinets weighing in excess of 150kg required to be bolted to the ground? (I see conflicting information on this between this site saying that they do not need to be bolted if over 150kg (
https://www.police.qld.gov.au/progra...rage/howto.htm) and this one saying they
should be (
http://www.police.govt.nz/sites/defa...nts-pol67n.pdf ).
9) There is reference to solid timber as a safe material. In this case, could a purpose built storage cabinet be constructed from 2.5cm plywood, and reinforced with an internal structure of 2x4's with a 4x4 frame, along with a solid core door, protected hinges and deadbolts and steel sill around the door? I mostly ask because in Canada the police follow their own policies, so what is written in law and enforced in practice are two very different things. This would be for A Cat or A&E Cat firearms.
9A) May category A firearms be stored inside a locked home, out of view, but simply trigger locked? Based on what I've read I don't believe so, but it seems to not cover it directly.
9B) Must firearms be disassembled when stored? Would storing an A or E Category firearm in a locked approved safe or cabinet permit them to be left assembled without a trigger lock? If not, would adding a trigger lock to the firearm permit them to be left assembled? If they must be partially or fully disassembled, do the bolts have to be separately locked elsewhere, or can they just be hidden?
I see I found an answer to this one - as long as firearms are in a secure safe, they do not need to be disassembled. Correct?
http://www.nzhuntingandshooting.co.n...26/#post549117
9C) Ammunition storage. I see that it must be stored separately from firearms. Is it required to be locked in its own box, simply in a separate room, can it be locked with a firearm in a secure area such as a volt or safe?
10) In terms of places/locations that can be hunted or used for target shooting. I realize this will be a complicated one dictated by regional, municipal and federal laws, but in general, are there public areas that are permitted for target shooting or hunting without specific permission? I'm speaking in terms of heading out into somewhere for a weekend camping trip and doing some long range target shooting at the same time. In Canada there is crown/public land that is basically a free for all, but there are some exceptions in different provinces and specific locations.
11) Less on the legal side and more on the hobby side, I am primarily a military surplus and antique collector. I haven't seen much in the way of surplus or antiques for sale online, so curious about availability there. Is that the case or am I just looking in all the wrong places?
12) Any big shows that absolutely have to be attended in the next year? Looks like I'll be in Canada for the 1000 table show, figure I should keep it going by going to some shows in NZ when I get there.
13) Are there any relevant laws regarding building your own firearms? I'm referring to bolt actions in general, but semi-autos as well I suppose.
It's a bit of a grey area here in Canada, but general consensus is as long as it's not a pistol or semi auto you can do whatever you want, and if it is one of the two, you have to tell the police and possibly register it.
13A) Any controls on making suppressors? It's illegal in Canada so not done, but they're so darn simple it seems a waste of money to buy them.
14) Is barrel length controlled? I see that firearms under 30 inches are considered pistols, but am curious whether shortening barrels or rebarreling is permitted? I'm quite fond of short barreled bolt actions for thick bush hunting.
Canada's pretty laid back in that regard, especially the northern territories ;) The PAL (almost all legal long guns) takes a day to take/pass and the RPAL (pistols and some other long guns) takes another day, costing approximately $200 CAD depending on how much the instructor charges. The RCMP will take up to 3 months to send you the firearms license, but if you call daily it goes down to 1 month. Each province/territory has different laws regarding how people from out of province or country can hunt. From a quick look the NWT requires non-residents to use a government registered guide/outfitter if they hunt big game in the territory. Small game is ok without a guide, IE rabbits and grouse.
I believe this changed as of 2014 (
Information for Hunters | Environment and Natural Resources - heading Non-resident / non-resident alien hunting ). I don't think any of the western provinces allowing hunting under another's license anymore, though the Yukon might. Hunter hosts only exist in Alberta now - BC and the NWT don't have them.
