.510 Whisper on Rem 700

Here is my new 510 Whisper, Rem 700 LA, Fluted bolt etc with 750 Amax at 1075fps, (still doing 900 fps at 1000 yards)

http://i1004.photobucket.com/albums/...psp05faa7y.jpg

It has a 4.5-14 x 40 VX3 side focus CDS in a Spuhr mount, McMillan hunters Edge stock, 12" barrel with SSRNZ suppressor.

http://i1004.photobucket.com/albums/...pspzmgu6or.jpg

So far it is shooting pretty well :)

http://i1004.photobucket.com/albums/...pslsuae9pw.jpg

Pretty cool looking bullet.

http://i1004.photobucket.com/albums/...pswzkpobvz.jpg

I'm looking forward to stretching it legs on steel, it drops faster than a lead balloon so I might need to borrow one of the ATACRs off my 375s :thumbsup:

This will give you a little indication of noise & recoil.

https://www.youtube.com/watch?v=CelM9DsdHos

It isn't that quiet, but it isn't that loud either..

I have a couple more sections for the suppressor on the way.

The 750 Amaxs are relatively easy to get here at the moment :cool:

The biggest problem is deciding whether to put them in the BMG or Whisper :thumbsup:


Took her up the range again today :)

http://i1004.photobucket.com/albums/...pshoqoch0g.jpg

I'm a very happy Boy :)

First cold bore dirty barrel shot, bang on in 5-15 MPH wind, even had the scope off & bedded it since last weekend, gotta love those Sphur mounts :cool:

I reckon 1k on steel is very do-able :cool:

Very impressive accuracy for a subsonic round :cool:

Quote:

---

Originally Posted by Kiwi Greg

Here is my new 510 Whisper, Rem 700 LA, Fluted bolt etc with 750 Amax at 1075fps, (still doing 900 fps at 1000 yards)

http://i1004.photobucket.com/albums/...psp05faa7y.jpg

It has a 4.5-14 x 40 VX3 side focus CDS in a Spuhr mount, McMillan hunters Edge stock, 12" barrel with SSRNZ suppressor.

http://i1004.photobucket.com/albums/...pspzmgu6or.jpg

So far it is shooting pretty well :)

http://i1004.photobucket.com/albums/...pslsuae9pw.jpg

Pretty cool looking bullet.

http://i1004.photobucket.com/albums/...pswzkpobvz.jpg

I'm looking forward to stretching it legs on steel, it drops faster than a lead balloon so I might need to borrow one of the ATACRs off my 375s :thumbsup:

This will give you a little indication of noise & recoil.

https://www.youtube.com/watch?v=CelM9DsdHos

It isn't that quiet, but it isn't that loud either..

I have a couple more sections for the suppressor on the way.

The 750 Amaxs are relatively easy to get here at the moment :cool:

The biggest problem is deciding whether to put them in the BMG or Whisper :thumbsup:


Took her up the range again today :)

http://i1004.photobucket.com/albums/...pshoqoch0g.jpg

I'm a very happy Boy :)

First cold bore dirty barrel shot, bang on in 5-15 MPH wind, even had the scope off & bedded it since last weekend, gotta love those Sphur mounts :cool:

I reckon 1k on steel is very do-able :cool:

---

You'll need a vertical take of and a hit on the downward at 1000 metres?:O_O: it's called lobbing I used to do it with a shuttlecock!:D

mmmmm, I like alot:P

Looking at your vid it seems to have a reasonable amount of recoil. I guess when you're launching 750gr pills its to be expected.
Very :cool:

Quote:

---

Originally Posted by wsm junkie

Looking at your vid it seems to have a reasonable amount of recoil. I guess when you're launching 750gr pills its to be expected.
Very :cool:

---

Yep she recoils alright, its a really big shove, the scope kept touching me when shooting it at 215 yards, wouldn't be keen to shoot it uphill :D

Quote:

---

Originally Posted by Kiwi Greg

Yep she recoils alright, its a really big shove, the scope kept touching me when shooting it at 215 yards, wouldn't be keen to shoot it uphill :D

---

Come on there KG, where is you sense of adventure :D :D :D

Quote:

---

Originally Posted by mikee

Come on there KG, where is you sense of adventure :D :D :D

---

I have enough scars above my eye Mikee :thumbsup:

What sort of realistic max velocity could be obtained?

Quote:

---

Originally Posted by Kiwi Greg

I have enough scars above my eye Mikee :thumbsup:

---

one extra one would not be out of place then?? No?


ooh ooh I think I found my next toy, "project", I wonder if i can get one in a double rifle. I always wanted one

http://forums.accuratereloading.com/...43/m/472101969

Quote:

---

Originally Posted by mikee

one extra one would not be out of place then?? No?


ooh ooh I think I found my next toy, "project", I wonder if i can get one in a double rifle. I always wanted one

510 WSM Article - Topic

---

Yes that round has plenty of Merit, should I get a reamer :)

Quote:

---

Originally Posted by Kiwi Greg

Yes that round has plenty of Merit, should I get a reamer :)

---

my wallet needs time to recover :D from its last 2 visits to your shop

Quote:

---

Originally Posted by mikee

my wallet needs time to recover :D from its last 2 visits to your shop

---

By the time I got the reamer etc your wallet would be fine :thumbsup:

Quote:

---

Originally Posted by mikee

one extra one would not be out of place then?? No?


ooh ooh I think I found my next toy, "project", I wonder if i can get one in a double rifle. I always wanted one

510 WSM Article - Topic

---

That was worth a read. US$1200 total build cost and a pretty cool 50cal in a cut down WSM case. I'd buy one, still super sonic at 1000 yards after leaving barrel at 1550ft/sec! :-)

Quote:

---

Originally Posted by craigc

That was worth a read. US$1200 total build cost and a pretty cool 50cal in a cut down WSM case. I'd buy one, still super sonic at 1000 yards after leaving barrel at 1550ft/sec! :-)

---

I can build you one, haven't done one yet but have the reamer :)

Recoil would be interesting supersonic ;)

What would be a real rough price guide for building a 510WSM if the donor rifle is supplied?

Cheers Antz

Quote:

---

Originally Posted by Antz

What would be a real rough price guide for building a 510WSM if the donor rifle is supplied?

Cheers Antz

---

I guess $1000-1200 depending on what's required, bedding etc.

Feel free to email me terminatorproducts@xtra.co.nz

What would be a rough build price for either a 510WSM or a 510 Whisper if I supplied the action? Just a rough price and what action would you require?

Cheers Antz

Quote:

---

Originally Posted by Antz

What would be a rough build price for either a 510WSM or a 510 Whisper if I supplied the action? Just a rough price and what action would you require?

Cheers Antz

---

The WSM requires a standard magnum bolt face & the Whisper requires the larger Lapua magnum bolt face.

Would be best built on a LA Rem 700

You could use a long bolt stop magnum Tikka for the WSM.

Price really comes down to component choices.

Feel free to email me.