Thread: 7-375 Ruger

Originally Posted by Kiwi Greg

Yep I have two 7-375 reamers

The Tikkas magazine is much shorter than the Remington standard LA magazine

With my Tikka I can get a 168 Bergers just off the lands and mag fit if that helps.

Could it be done without turning the neck? Would want to neck down the 375 brass myself, but if its too much hassle would just stick with 7mm rem mag. Would be cool to have a wildcat though

Originally Posted by Benji

Could it be done without turning the neck? Would want to neck down the 375 brass myself, but if its too much hassle would just stick with 7mm rem mag. Would be cool to have a wildcat though

I can supply the brass ready to fire no problem.

It only has to be formed once.

I have fired a couple of cases more than twenty times so brass life is pretty good

It generally is about 200fps up on a Rem mag so a pretty reasonable performance increase.

Could you supply a barrel? and if so what make? would want a number 4 contour at least, length around 28", fluted, bead blasted. brass and dies, cost?

Originally Posted by Benji

Could you supply a barrel? and if so what make? would want a number 4 contour at least, length around 28", fluted, bead blasted. brass and dies, cost?

No problem to do that, fitted into your action bedded, load developed & run in ?

Do you want a brake ?

Chuck me an email terminatorproducts@xtra.co.nz.

I have been playing with some different powders in the 7-375 & I've found one that makes it really hum

It will give 100-125 fps more speed than the previous powder in a 26" barrell.

The 7-375 I have been testing with has 26" Trueflite, the velocity has gone from 3250 to 3350-3375 fps with a 162 Amax with no shaving or stamping

Pretty impressive speed from a light weight easy magazine fed rifle

Recoil is non-existent with the T2 Terminator brake.

That's fair bloody moving!:thumbup:

Sent from my GT-S5360T using Tapatalk 2

Originally Posted by veitnamcam

That's fair bloody moving!:thumbup:

Sent from my GT-S5360T using Tapatalk 2

It sure is

The lack of recoil is just as impressive

Arggh Jeez Greg. I had just convinvced myslf the other day I could not afford to build a 7-375

Now ya go and throw this in my face. But thats an awesome speed

Hi Greg
Whats involved in, and cost of a conversion? Is it just a reaming and open up the bolt face to convert?

Originally Posted by username

Hi Greg
Whats involved in, and cost of a conversion? Is it just a reaming and open up the bolt face to convert?

Converting from ?

It is standard magnum bolt face, Rem mag, Win mag, Rum etc.

Originally Posted by Kiwi Greg

Converting from ?

It is standard magnum bolt face, Rem mag, Win mag, Rum etc.

7RM

Originally Posted by username

7RM

Sako A7 7RM

Originally Posted by username

Sako A7 7RM

I havent had a play with an A7 yet, I will make some enquires

Thanks Greg. Very interested.