Defiance 28 Nosler

Just got this back from Scott & took it up the range today.

https://i1004.photobucket.com/albums...psk8tyv2u7.jpg

Not sure on the brand of chassis the customer supplied.

http://i1004.photobucket.com/albums/...psav58vcsh.jpg

Nice shiny Defiance action, Bartlein barrel & T3 Terminator Brake.

http://i1004.photobucket.com/albums/...pshkqe148v.jpg

The T3 brake really calms it down.

http://i1004.photobucket.com/albums/...psrri9orye.jpg

Loaded some bullets up & took it up the range today

http://i1004.photobucket.com/albums/...psljyysi6g.jpg

Shoots pretty well with both the 195 Elite Hunters & 180 ELDMs

http://i1004.photobucket.com/albums/...psqxeeoycw.jpg

So with twenty rounds fired its ready to go as an early Xmas present for my customer :)

Greg,, your muzzle brakes.. do they need to be thread locked in place/ or are they removable??

Whats the twist rate of barrel?? Have you had anything to do with the bertram 28noz brass.....

Quote:

---

Originally Posted by matagouri

Greg,, your muzzle brakes.. do they need to be thread locked in place/ or are they removable??

Whats the twist rate of barrel?? Have you had anything to do with the bertram 28noz brass.....

---

They are removable if required, handy to put a little bit of blue loctite on if the aren't being removed often

It is an 8 twist

I used customer supplied Bertram brass with this one & the previous one.

Nice work once again Greg you don't dissappoint