So here are the Stocky's Stocks, which I can supply, right now :)
https://hosting.photobucket.com/imag...720&fit=bounds
They are also available with an M24 barrel channel which will be close to a carbon barrel & lighter than these two with the sporter inlet
https://hosting.photobucket.com/imag...720&fit=bounds
They are a little shiny, like Kens first ones, shouldn't be an issue to rub them down with a Scotchbrite pad etc to give them a matt finish if required
https://hosting.photobucket.com/imag...720&fit=bounds
The weight is pretty good, lighter than many other offerings
https://hosting.photobucket.com/imag...720&fit=bounds
Looking pretty good so far
https://hosting.photobucket.com/imag...720&fit=bounds
Available for Remington SA & LA, with standard BDL & M5 mag cut out with the SA, sporter & M24 (carbon) barrel channel for both
https://hosting.photobucket.com/imag...720&fit=bounds
Vertical offering, the LA ones are lighter
https://hosting.photobucket.com/imag...720&fit=bounds
Will be easy enough to modify them to take the Remington clone custom actions
https://hosting.photobucket.com/imag...720&fit=bounds
Looking forward to getting them onto some of my personal rifles & using them in the field :)