Printable View
I have made another in my series of brakes for the Cheytac size case.
http://i1004.photobucket.com/albums/...M375DCM010.jpg
http://i1004.photobucket.com/albums/...M375DCM011.jpg
My daughter Ashlee has tested it no problem :)
Here is a video of the action, 425 grains @ 3079 fps out of the 375 DCM :cool:
http://i1004.photobucket.com/albums/...85yards008.jpg
Anyone would think your sole purpose in having a daughter was to demonstrate the efficiency of your brakes haha
She does do it well:cool:Quote:
Originally Posted by horihunter
This is the brake I PM'd you about. I put a Muscle Magnum 4 Port on my Edge in spite of the maker's claim that the next down would be quite satisfactory. When I asked if there would be any positive increase by "going oversize" the response was "minute." I am very happy with this rifle; a good deal of that sentiment originates with the brake's effectiveness. I plan on either making a heavier Edge of getting up into Cheytac territory, but haven't decided on 338Snipetac, 338 Cheytac, 375 Cheytac, or 375 Snipetac. Because the Edge does so well I feel pushed both ways; do another, heavier Edge building on my experience in all phases of it, or attempting to begin anew, stepping up the effective range and delivery of heavier payload at those longer ranges. Just now I'm unconvinced that stepping up will yield any significant, realistic, and pragmatic, positive. However, I'll sure be spending a sack of loot! How'd you like that for wandering--circling the subject? Always appreciate your input here--or at LRH, thanks.
Quote:
Originally Posted by Kiwi Greg
LOL.Quote:
Originally Posted by alcesgigas
That was a wandering circle :)
I have found that "over braking" can hurt brake performance a little or provide the same recoil reduction.
This I believe is due to gas velocity & volume through the ports.
If I was you I would step up to a 375.
Yes they will cost more to run, but if you want to shoot right out there, 12-1500 plus they are the way to go.
Terminal performance is hard to quantify at the moment but it will surely get better as time goes on & more people are shooting the 375s.
Having said that a 338 Cheytac imp is a significant step up from the Edge & much more sensible than building another "bigger, better" Edge.
There are other cartridges available between the Edge & Cheytac, like Kirbys Raptor, that could be worth a look at in the future.
Cheers Greg.
I've fired a few 425gr CE myself using the T5 brake in my own 375 and would highly recommend it over any other brake on the market if your serious about taming recoil:O_O:
PS: Greg has tested the T5 against some of the best brakes out there one of them being kirbys Allens 5 port pain killer brake that I was going to use for my 375 build, after seeing the recoil difference myself I just had to have a T5.
Just ordered one from Greg. Anticipating the recoil already :cool:
I have a 375 SnipeTac (pretty much the 375Extreme that was mentioned) that is about to come my way and the only thing missing was a decent brake on there. The T5 got my attention and I love Greg's video's wit the rifle just about to fly off the table ;)
Send it!