Just hook me up bro! Whichever way you think, I can't bloody wait[emoji844][emoji844]
Sent from my iPhone using Tapatalk
Printable View
Just hook me up bro! Whichever way you think, I can't bloody wait[emoji844][emoji844]
Sent from my iPhone using Tapatalk
Sweet, comb height more important for me than pocket.Quote:
Originally Posted by Nibblet
Need to be able to secure closed cell foam as discussed in a sleeve or similar.
B
Be good to get this mentioned on some overseas forums so they can export a few, especially with the way the dollar is.
Talking with Matt it will be something similar to the triad one's. Sleeve won't work well due to the nature of the materialQuote:
Originally Posted by shift14
@1toeknee1 - 1, coyote brown
@Alonzo - 3, multicam, kryptek, coyote brown
@shift14 - 1, coyote brown
@nzfubz - 1, coyote brown
@Gerbs - 1, black
@Bryan -1, multicam
@von tempsky fan - 2 any form of camo
@Moutere - 1, multicam
@Scouser - 1, black
@sneeze - 1, black
@Danny - 1, most common colour
@camo wsm -1 maybe 2 TBC, definitely 1 in pencott
@Happy - 1, black
@Gillie - 1, OD green maybe with no pocket
@southernredneck - 1, coyote brown left hand
@kiwijames - 1, no colour choice supplied
@longrange308 - 1, camo of some sort
@6mm ackley - 1, no colour choice supplied
@POME - 1, black no pocket
@ariki - 1, no colour choice supplied
@NZShoota - 1, no colour choice supplied
@peteroks
@Sylvester
I'm going to assume that everyone other than those that have said otherwise and those that PM me in the next few days that your preference is for the zip to close towards the rear, if you want it to close towards the front please let me know ASAP and @twinneedle will go into production during the week.
@Gillie and whoever else wanted no pocket, Matt has told me it's a pain in the ass to have multiple things going on at once but if you are hell bent on not having a pocket and just a velcro patch on the outside these will be considered custom jobs and looking at around $85 give or take.
As it is he is trying to get them out the door for as close to $65 each.
Where comb adjustment is concerned it will be similar to the Triad ones with velcro strips to build up to the desired height.
@Gibo..... you know you want one :thumbsup:
The sooner I get everyones preferred zip direction the sooner you will have em.
Oh and don't pay too much attention to the list, I just need to tag all the names again, I have everyones updated orders on my spreedsheet
Cheers for helping Kiwi!
I'm happy with the zip closing at the rear
Sent from my iPhone using Tapatalk
@Nibblet . May I have two now please. Sorry one for a mate both black
Quote:
Originally Posted by Nibblet
Should have put it in bold haha :thumbsup:Quote:
Originally Posted by Happy
I have you down for 2, black and kyrptek both R/H
To clear some confusion, or maybe add some
Attachment 38966
Forward closing zip for me please.
Hi @Nibblet can I get two 'bullet velcro cards'?.....One for 12 shot shells one for 223 cal rounds?....I'm good for what you have me down for, black, zip to back at bottom!
Awesome thanks
Sorry to be a total pain in the back side but i only want one to increase the comb height. No Velcro on the out side or bullet holder and no pocket. I dont mind if it costs me a bit more. Just want i to increase the comb height for the rifles i have a 50 mm scope on. Is this to much of a fuck about?
That should have said 12 'gauge' shot shells....Quote:
Originally Posted by Scouser
For those who are hassle free, good buggers, without issues [emoji41]whats the expected time frame[emoji780]
Sent from my iPhone using Tapatalk
I don't give a toss where the zip is I'll go with the status quo bro.
Looks good @Nibblet, i'll stay with the one, RH, OD green, no pocket but with Velcro and bullet loops to suit 243Win
Cheers,
Looking good Nibblet, I would like a forward closing zip on mine please.
Also, how is the payment for this going to be done?
Foward direction zip, and 12g size card?
(assuming we can get other cards in the future - otherwise ummmm .223/7.62x39 as well?)
I'll hold off answering the other questions, will let @twinneedle do that.
As far as rounds go though, left to right; 223, 6.5x55, 308, 7mmrm, 450 bushmaster. 223 a little loose but maybe because it's had the 450 living in there
http://images.tapatalk-cdn.com/15/07...ca2504e95c.jpg
http://images.tapatalk-cdn.com/15/07...1e87205087.jpg
Cheers mate, looks like it will fit all my ammo needs, do @twinneedle make 12g shot shell velcro cards?
Any update on the eta @twinneedle or @Nibblet?
Oh shit I just saw this, keen as. I'm in CHCH too ! Can I just come see you to order Twin needle?
Hi, we can make you a 12g card but you wont get many in the stock pack as the pocket size is quite small for 12g rounds. We are just waiting on the final order confirmation on style and colours. It is scheduled into production towards the end of August, ready early September.
That will be good timing @twinneedle. I am attending another competition about the middle of September and it would be good to have mine there (yes, I realise mine being a special will likely mean it will be last off the production run!) :thumbsup:
Thanks for the quick feedback @twinneedle i will just go with the normal bullet card, big thanks!!!!!Quote:
Originally Posted by twinneedle
All the names listed below are on the order for the stock packs. Please can each one of you send me a private message with your postal address and email and contact number so I can allocate this to your order and get in touch once they are ready. Can someone also let me know how to tag people in the message, cant seem to work it out. I know it involves using @ but can pick up the link to that person (novice sorry!)
2. Nibblet
3. 1toeknee1
4. Alonzo
5. shift14
6. Nzfubz
7. Gerbs
8. Bryan
9. von tempsky fan
10. moutere
11. scouser
12. sneeze
13. Danny
14. camo wsm
15. Happy
16. Gillie
17. southernredneck
18. Kiwi James
19. longrange308
20. 6mm Ackley
21. Pome
22. ariki
23. NZShoota
24. Tombi
25. Tararua
26. Sylvester
27. Peteroks
28. MSL
@ in front of name with no space. @twinneedle
What do you need mate? And who do you want details sent to?
Sent from my Nexus 9 using Tapatalk
See post #107
My bad, cheers man. Details sent
Sent from my Nexus 9 using Tapatalk
Pm sent with details
PM sent with details.... @twinneedle im going away to pommyville on the 21st, will it be finalised by then, or should i wait till i get back?
will still pay you first :thumbsup:
Hi People, just to keep you updated, we have just had the wide Velcro loop sheet land from the U.S and we are currently getting the knives made for the click press for a couple of the pattern pieces so at this stage it will be mid September for delivery, trying to make it happen sooner, but things have taken a little longer than expected sourcing certain fabrics used on these from the U.S.
Thanks for the update @twinneedle
Hi @twinneedle how are these coming along? Looking forward to getting mine and trying it out! :thumbsup:
Hi @Gillie they are in production as we speak and are aiming to have the bulk order completed by Friday/Monday. We need to get them finished and out before we leave fro the Sika Show next Thursday. I will put a post up on here with everyone's allocated stock number so people can pay for the pouch and use the number as the reference.
Is pickup at the Sika Show possible ?Quote:
Originally Posted by twinneedle
B
