show us your smoker

**Pengy** · 20-05-2018, 12:51 PM

Originally Posted by kukuwai

Cheers

Sent from my SM-G950F using Tapatalk

I noticed that the Spot (?) store in Nelson (opposite the red shed) had a few different types in stock yesterday

**A330driver** · 23-05-2018, 11:00 AM

Name: AA4F60BF-FAB8-4CC7-94A7-5F073CCC3668.jpeg
Views: 328
Size: 1.84 MB

Name: B27918BD-F50B-45C3-A3A6-DE906A14DED0.jpeg
Views: 367
Size: 1.94 MB

**mallard833** · 13-06-2018, 02:09 PM

Not the best photos, but I made this out of a 100 gal propane tank that was past it's useful life to the gas company. 1200w electric burner connected to a temperature controller provides the heat. Smoke comes from pellets in an amaz'n stainless steel mesh pellet smoker.

Sent from my Moto E (4) Plus using Tapatalk

**223nut** · 13-06-2018, 02:19 PM

@mallard833 looks like you could fit half a cow in that

**mallard833** · 14-06-2018, 04:31 AM

My last smoker was too small, so I made sure I wouldn't have the same problem with this one. I believe each grate is around 22" in diameter. I think they were made for a large Weber kettle.

Originally Posted by 223nut

@mallard833 looks like you could fit half a cow in that

Sent from my Moto E (4) Plus using Tapatalk

**johnd** · 14-06-2018, 04:24 PM

Mine is cheapie Brinkman vertical, I have added 250mm to the top of it to allow for sausages and salami to hang

When the temp gets a bit hit and miss I turn on the heater element i robbed out of a cheap bunnings electric barby

I covered it with ply to help with keeping the heat in. Usually use heat beads or for cold smoking my own rendition of an Amazin smoker .... the older version that just uses the dust from a drop saw and burns up and down defined lanes on a stainless mesh

Name: IMG_0108.JPG
Views: 601
Size: 233.9 KB