Thread: 2-Stroketastic!!!

Frame all finished. Found more stress cracks, drilled holes in the ends of the cracks (old trick, logic being that a crack will stop at a hole) then ground out a v into the crack and welded it all back again. Finally ground the welds back flush and you'd never know any different.


I took it all back to bear metal, and dropped it off at local car painters for a coat of etch primer and some 2 pak paint. I looked at other options briefly...then thought paint is as good as anything else, and secondly it is just a big kids scooter after all, not a show car.

Kj