How does it drive the tire? Friction drive on the tread? direct drive? chain an sprokets? gears?
Printable View
How does it drive the tire? Friction drive on the tread? direct drive? chain an sprokets? gears?
It has a friction drive. Basically out of the motor, directly connected to the crank is what looks like the knurled handle of a socket wrench. The drive spindle is about 19mm in diameter and the wheel is roughly 190mm in diameter...so giving it roughly a 10:1 gear ratio.
This knurled drive is a direct drive...i.e. no clutch, so when the motor is going, so are you. It's single speed, no gears. The engine should top out at 19,000 rpm (give or take). I haven't done the math, but it will do about 40-50km/h. Doesn't sound fast, but it will get to top speed pretty quickly!
As the tire wears, you can move the tire up to meet the motor which is in a fixed position.
Very simple design. It does have a few negatives, but overall its perfect for this application.
Careful we don't want any attempts at the Darwin awards :O_O:
50km/h will seem like warp 3 when you are on that tiny thing, Those small wheels wont stop too fast either!
BTW I love it already, it looks like all motor and expansion chamber.
Yes VC you're on to it, but at the cost of acceleration. Standard spindle size is 0.6", because of the extra power I'm hoping/banking on getting from my porting and other mods, I've gone to 0.75" spindle diameter. This will hopefully raise top end speed from about 30-40kph to about the expected 40-50kph I'm going for.
Hopefully it doesn't bog too much at the low end due to the taller gear ratio...but only time will tell?:D
Looking sick Kimjon, at 50kmph I'd say you are going to scare hrs elf and any citizens nearby shitless when you scream past them on the footpath.
You are going to have to post a video.
Maybe down the greyhound track riding it dressed as a rabbit?
I think I need one!
Sent from my SM-G900F using Tapatalk
But can it drift?
My parts arrived from the U.S. today. Ebay rocks!
Anyway, just waiting on one last package, some fancy billet clamps, but for now two $0.02 cable ties will do just fine.
So as they say..."that's a wrap!" The photos don't do it justice, I spent hours polishing all the aluminium to look like chrome, and every detail has had an obsessive amount of attention.
My wife is back from her holiday, I can see her eyes glaze over as soon as I mention this project...I'm going to be banned from talking about it around her soon, I can feel it:D
http://i964.photobucket.com/albums/a...psazuurnlx.jpg
http://i964.photobucket.com/albums/a...pssx6cascf.jpg
http://i964.photobucket.com/albums/a...psmywjlout.jpg
So as silly a project this is, I'm pretty happy with what I've made. Now is time to ride it, well maybe tomorrow...it's dark outside and raining right now...:D
Kj
And after the test ride you can order the Nos kit :thumbsup:
Rain could make it really imteresting!!
Fuck yea! Looks bad arse all right.
Okay, yeah/nah...won't be in a hurry to fit nitrous oxide to it...pretty fast alright, definitely not disappointed in its performance that's for sure.
This thing is a beast! Wants to run fast, does bog a little from its idle, but from low/mid range upwards the power band is massive. If you keep it out of absolute idle, i.e. low/mid upwards there is power to burn with very quick throttle response. Best I can describe the feeling is like running any performance car/bike as if stuck in second gear.
So gopro footage?