Thread: 410 Enfield

A bit more done, I have welded a pad to the suppressor tube to mount the wood work too and inleted the wood to fit, the woodwork always has the potential for stuff ups but worked out ok this time.


I made up a little steel plate to bolt the sling swivel onto, this also keys into the front cap


For the front sight I cut down the Enfield one and welded it to the shroud, it probably would have worked but it was higher than I wanted, the idea is to mount an aperture or v on the back of the charger bridge.


So this was binned and a brass bead made up, its just a m4 screw with a bit of file work, it seems to be a better height and needs the notch about 5mm above the charger bridge, this was checked with a laser bore sighter and stacking bits and pieces onto the charger bridge to find the right height.